[Fri Sep 23 13:05:51 2011] Detection parameters:
  Position = (551.5, 1146.6) = 1 52 42.00 -13 35 14.2
  Extent = 0.6" x 0.6", rotation angle = 134 degrees
  Source counts = 33.7 +/- 6.0
  Background counts = 2.3
  Rate = 0.0008 +/- 0.0002

[Fri Sep 23 13:05:55 2011] Off-axis axis estimate = 2.96'
[Fri Sep 23 13:07:42 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:07:42 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 23 13:07:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.812
[Fri Sep 23 13:07:42 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.57"
[Fri Sep 23 13:07:47 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src10.ximg exists
[Fri Sep 23 13:07:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src10.csv
[Fri Sep 23 13:07:47 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Sep 23 13:07:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src10.csv
[Fri Sep 23 13:07:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:07:48 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 23 13:07:48 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 23 13:07:48 2011] Fit fullrun_ccd3_acisf11868_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 23 13:08:09 2011] Spatial fit model total counts = 38.946800, observed total counts = 39.000000
[Fri Sep 23 13:08:09 2011] Offset between fit and detection position for source 14 = 0.596988 pixels
[Fri Sep 23 13:08:09 2011] 38.564130 total counts/ 7.697630 bgd. counts: snr = 11.125227
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.596988 pixels
  Position = (551.9, 1147.1) = 1 52 42.00 -13 35 14.2
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 30.9 +/- 6.2
  Background counts = 7.7
  Rate = 0.0008 +/- 0.0002
[Fri Sep 23 13:08:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:08:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:08:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:08:09 2011] Source does appear to be extended
[Fri Sep 23 13:08:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:08:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:08:40 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Sep 23 13:08:40 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.127
[Fri Sep 23 13:08:40 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.56"
[Fri Sep 23 13:08:41 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src10.ximg exists
[Fri Sep 23 13:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src10.csv
[Fri Sep 23 13:08:41 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Sep 23 13:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src10.csv
[Fri Sep 23 13:08:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:08:46 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 23 13:08:46 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 23 13:08:46 2011] Fit fullrun_ccd3_acisf11868_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 23 13:09:08 2011] Spatial fit model total counts = 38.930400, observed total counts = 39.000000
[Fri Sep 23 13:09:08 2011] Offset between fit and detection position for source 14 = 0.003991 pixels
[Fri Sep 23 13:09:08 2011] 38.544990 total counts/ 7.795690 bgd. counts: snr = 11.013059
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.003991 pixels
  Position = (551.9, 1147.1) = 1 52 42.00 -13 35 14.2
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 30.7 +/- 6.2
  Background counts = 7.8
  Rate = 0.0008 +/- 0.0002
[Fri Sep 23 13:09:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:09:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:09:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:09:08 2011] Source does appear to be extended
[Fri Sep 23 13:09:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:14:14 2011] Not overwriting source region fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.reg
[Fri Sep 23 13:14:14 2011] Extracting stamp from image fullrun_ccd3_acisf11868_pi14-548_cl_sm2.00.img.gz, (527, 1122) - (577, 1172)
[Fri Sep 23 13:14:14 2011] Writing fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14.gif
[Fri Sep 23 13:14:59 2011] ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.evt and ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Sep 23 13:14:59 2011] Size of ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.evt.gz[events] = 34 counts
[Fri Sep 23 13:14:59 2011] Mean chipx,y = (278.12, 919.71)
[Fri Sep 23 13:14:59 2011] Mean tdetx,y = (4212.29, 3339.12)
[Fri Sep 23 13:14:59 2011] chipx,y range = (261.00-298.00, 904.00-938.00)
[Fri Sep 23 13:14:59 2011] Size of ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 15 counts
[Fri Sep 23 13:14:59 2011] ../../acisf11868/products/images/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.img and ../../acisf11868/products/images/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Sep 23 13:14:59 2011] ../../acisf11868/products/spectra/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.pi and ../../acisf11868/products/spectra/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Sep 23 13:14:59 2011] Not generating rmf since there are only 30 counts
[Fri Sep 23 13:15:03 2011] ../../acisf11868/products/lightcurves/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.lc and ../../acisf11868/products/lightcurves/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Sep 23 13:16:53 2011] 189.922
[Fri Sep 23 13:16:59 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:16:59 2011] Error reading totcts from fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Sep 23 13:17:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:17:00 2011] Using photon index=1.80, rate=0.000769, arf fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src14.arf
[Fri Sep 23 13:17:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:17:00 2011] Updating source flux to 9.8e-15
[Fri Sep 23 13:17:18 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting