[Fri Sep 23 13:05:48 2011] Detection parameters:
  Position = (444.2, 611.6) = 1 52 45.62 -13 39 37.5
  Extent = 0.5" x 0.5", rotation angle = 87 degrees
  Source counts = 105.5 +/- 10.3
  Background counts = 1.5
  Rate = 0.003 +/- 0.0003

[Fri Sep 23 13:05:55 2011] Off-axis axis estimate = 3.11'
[Fri Sep 23 13:07:42 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:07:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 13:07:42 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Sep 23 13:07:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 8, frac = 0.673
[Fri Sep 23 13:07:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.60"
[Fri Sep 23 13:07:42 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 13:07:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 13:07:42 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 13:07:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 13:07:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11868_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:07:48 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 13:07:48 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 13:07:48 2011] Fit fullrun_ccd3_acisf11868_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 13:08:09 2011] Spatial fit model total counts = 115.878000, observed total counts = 122.000000
[Fri Sep 23 13:08:09 2011] Offset between fit and detection position for source 1 = 0.673115 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.673115 pixels
  Position = (444.7, 612.0) = 1 52 45.62 -13 39 37.5
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 114.3 +/- 10.7
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Fri Sep 23 13:08:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:08:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:08:09 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:08:09 2011] Source does appear to be extended
[Fri Sep 23 13:08:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:08:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:08:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 13:08:40 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Sep 23 13:08:40 2011] source mask rpix=1.2, npix_max = 12, mask sum = 10, frac = 0.830
[Fri Sep 23 13:08:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.61"
[Fri Sep 23 13:08:41 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 13:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 13:08:41 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 13:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 13:08:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11868_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:08:46 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 13:08:46 2011] fullrun_ccd3_acisf11868_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 13:08:46 2011] Fit fullrun_ccd3_acisf11868_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 13:09:08 2011] Spatial fit model total counts = 113.333000, observed total counts = 122.000000
[Fri Sep 23 13:09:08 2011] Offset between fit and detection position for source 1 = 0.008035 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008035 pixels
  Position = (444.7, 612.0) = 1 52 45.62 -13 39 37.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 111.5 +/- 10.6
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Fri Sep 23 13:09:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:09:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:09:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:09:08 2011] Source does appear to be extended
[Fri Sep 23 13:09:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:14:14 2011] Not overwriting source region fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 13:14:14 2011] Extracting stamp from image fullrun_ccd3_acisf11868_pi14-548_cl_sm2.00.img.gz, (417, 584) - (473, 640)
[Fri Sep 23 13:14:14 2011] Writing fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 13:14:19 2011] ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.evt and ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 13:14:19 2011] Size of ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.evt.gz[events] = 118 counts
[Fri Sep 23 13:14:19 2011] Mean chipx,y = (763.83, 666.25)
[Fri Sep 23 13:14:19 2011] Mean tdetx,y = (4465.75, 3824.83)
[Fri Sep 23 13:14:19 2011] chipx,y range = (748.00-785.00, 647.00-685.00)
[Fri Sep 23 13:14:20 2011] Size of ../../acisf11868/products/events/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 16 counts
[Fri Sep 23 13:14:20 2011] ../../acisf11868/products/images/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.img and ../../acisf11868/products/images/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 13:14:20 2011] ../../acisf11868/products/spectra/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.pi and ../../acisf11868/products/spectra/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 13:14:23 2011] ../../acisf11868/products/lightcurves/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.lc and ../../acisf11868/products/lightcurves/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 13:16:52 2011] Keeping rmf generated by specextract
[Fri Sep 23 13:16:52 2011] 191.391
[Fri Sep 23 13:16:59 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:16:59 2011] Error reading totcts from fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 13:17:00 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:17:00 2011] Using photon index=1.80, rate=0.00279, arf fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 13:17:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:17:00 2011] Updating source flux to 3.5e-14
[Fri Sep 23 13:17:22 2011] Reading fit data from acisf11868/analysis//spectral/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 23 13:17:22 2011] Spectral fit parameter nH value = 2.36514e+22
[Fri Sep 23 13:17:22 2011] Spectral fit parameter PhoIndex value = 1.69241
[Fri Sep 23 13:17:22 2011] Failed to get F(0.3-8.0) from acisf11868/analysis//spectral/fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 13:17:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:17:22 2011] Using Nh = 2.4e+22, photon index=1.69, rate=0.00279, arf fullrun_ccd3_acisf11868_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 13:17:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:17:22 2011] Updating source flux to 5.7e-14