[Fri Sep 23 13:05:42 2011] Detection parameters:
  Position = (727.2, 362.5) = 1 53 3.07 -13 36 27.1
  Extent = 0.9" x 0.5", rotation angle = 134 degrees
  Source counts = 18.4 +/- 4.5
  Background counts = 1.6
  Rate = 0.0005 +/- 0.0001

[Fri Sep 23 13:05:45 2011] Off-axis axis estimate = 2.73'
[Fri Sep 23 13:07:27 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:07:27 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Fri Sep 23 13:07:27 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.905
[Fri Sep 23 13:07:27 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.53"
[Fri Sep 23 13:07:38 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass0_src12.ximg exists
[Fri Sep 23 13:07:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11868_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 13:07:38 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Sep 23 13:07:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11868_pi14-548_cl_pass0_src12.csv
[Fri Sep 23 13:07:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11868_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11868_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:07:41 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 23 13:07:41 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 23 13:07:41 2011] Fit fullrun_ccd2_acisf11868_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 23 13:08:06 2011] Spatial fit model total counts = 22.835100, observed total counts = 23.000000
[Fri Sep 23 13:08:06 2011] Offset between fit and detection position for source 6 = 0.511425 pixels
[Fri Sep 23 13:08:06 2011] 23.275040 total counts/ 7.928340 bgd. counts: snr = 5.450343
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.511425 pixels
  Position = (727.2, 363.0) = 1 53 3.08 -13 36 27.1
  Extent = 0.7 (0.4-1.2)", rotation angle = 0
  Source counts = 15.3 +/- 4.8
  Background counts = 7.9
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 13:08:06 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:08:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:08:06 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:08:06 2011] Source does appear to be extended
[Fri Sep 23 13:08:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:08:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:08:39 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 23 13:08:39 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.106
[Fri Sep 23 13:08:39 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.69"
[Fri Sep 23 13:08:40 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass1_src11.ximg exists
[Fri Sep 23 13:08:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11868_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 13:08:40 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Sep 23 13:08:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11868_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 13:08:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11868_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11868_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:08:40 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 23 13:08:40 2011] fullrun_ccd2_acisf11868_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 23 13:08:40 2011] Fit fullrun_ccd2_acisf11868_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 23 13:09:05 2011] Spatial fit model total counts = 22.359400, observed total counts = 23.000000
[Fri Sep 23 13:09:05 2011] Offset between fit and detection position for source 6 = 0.275757 pixels
[Fri Sep 23 13:09:05 2011] 22.354160 total counts/ 5.556260 bgd. counts: snr = 7.126294
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.275757 pixels
  Position = (727.2, 363.3) = 1 53 3.08 -13 36 27.0
  Extent = 0.8 (0.4-1.2)", rotation angle = 0
  Source counts = 16.8 +/- 4.7
  Background counts = 5.6
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 13:09:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:09:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:09:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:09:05 2011] Source does appear to be extended
[Fri Sep 23 13:09:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:11:46 2011] Not overwriting source region fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 23 13:11:46 2011] Extracting stamp from image fullrun_ccd2_acisf11868_pi14-548_cl_sm2.00.img.gz, (691, 327) - (763, 399)
[Fri Sep 23 13:11:46 2011] Writing fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6.gif
[Fri Sep 23 13:12:34 2011] ../../acisf11868/products/events/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.evt and ../../acisf11868/products/events/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 23 13:12:34 2011] Size of ../../acisf11868/products/events/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.evt.gz[events] = 20 counts
[Fri Sep 23 13:12:34 2011] Mean chipx,y = (240.05, 758.80)
[Fri Sep 23 13:12:34 2011] Mean tdetx,y = (3819.80, 3845.95)
[Fri Sep 23 13:12:34 2011] chipx,y range = (224.00-250.00, 742.00-774.00)
[Fri Sep 23 13:12:34 2011] Size of ../../acisf11868/products/events/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 12 counts
[Fri Sep 23 13:12:34 2011] ../../acisf11868/products/images/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.img and ../../acisf11868/products/images/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 23 13:12:34 2011] ../../acisf11868/products/spectra/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.pi and ../../acisf11868/products/spectra/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 23 13:12:34 2011] Not generating rmf since there are only 16 counts
[Fri Sep 23 13:12:38 2011] ../../acisf11868/products/lightcurves/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.lc and ../../acisf11868/products/lightcurves/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 23 13:14:13 2011] 191.376
[Fri Sep 23 13:16:58 2011] Updating aperture counts using extracted products
[Fri Sep 23 13:16:58 2011] Error reading totcts from fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 23 13:16:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 13:16:59 2011] Using photon index=1.80, rate=0.00042, arf fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6.arf
[Fri Sep 23 13:16:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 13:16:59 2011] Updating source flux to 5.1e-15
[Fri Sep 23 13:17:17 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 23 13:17:18 2011] acisf11868/analysis//spectral/fullrun_ccd2_acisf11868_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete