[Thu Oct 20 10:19:40 2011] Detection parameters:
  Position = (204.0, 569.2) = 2 37 1.68 -52 23 46.6
  Extent = 0.5" x 0.5", rotation angle = 62 degrees
  Source counts = 1306.2 +/- 37.1
  Background counts = 72.8
  Rate = 0.08 +/- 0.002

[Thu Oct 20 10:19:41 2011] Off-axis axis estimate = 7.70'
[Thu Oct 20 10:20:15 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 10:20:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 10:20:15 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Thu Oct 20 10:20:15 2011] source mask rpix=5.3, npix_max = 135, mask sum = 132, frac = 0.971
[Thu Oct 20 10:20:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.62"
[Thu Oct 20 10:20:16 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 10:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11867_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 10:20:16 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 10:20:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11867_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 10:20:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11867_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11867_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 10:20:16 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 10:20:16 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 10:20:16 2011] Fit fullrun_ccd3_acisf11867_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 10:20:22 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 30.290130 pixels away
[Thu Oct 20 10:20:22 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 10:20:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 10:20:22 2011] Assessing source extent using major
[Thu Oct 20 10:20:22 2011] Source does appear to be extended
[Thu Oct 20 10:20:22 2011] Computing asymmetry using major and minor axis, asym = 1.03
[Thu Oct 20 10:20:35 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 10:20:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 10:20:35 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Thu Oct 20 10:20:35 2011] source mask rpix=5.3, npix_max = 135, mask sum = 132, frac = 0.971
[Thu Oct 20 10:20:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.62"
[Thu Oct 20 10:20:35 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 10:20:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11867_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 10:20:35 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 10:20:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11867_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 10:20:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11867_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11867_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 10:20:35 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 10:20:35 2011] fullrun_ccd3_acisf11867_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 10:20:35 2011] Fit fullrun_ccd3_acisf11867_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 10:20:42 2011] Spatial fit model total counts = 2200.510000, observed total counts = 2302.000000
[Thu Oct 20 10:20:42 2011] Offset between fit and detection position for source 1 = 0.882899 pixels
[Thu Oct 20 10:20:42 2011] 2202.062000 total counts/ 154.932000 bgd. counts: snr = 164.465519
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.882899 pixels
  Position = (203.3, 568.7) = 2 37 1.75 -52 23 47.1
  Extent = 2.2 (2.1-2.3)", rotation angle = 0
  Source counts = 2047.1 +/- 46.9
  Background counts = 154.9
  Rate = 0.1 +/- 0.003
[Thu Oct 20 10:20:42 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 10:20:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 10:20:42 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 10:20:42 2011] Source does appear to be extended
[Thu Oct 20 10:20:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 10:22:27 2011] Not overwriting source region fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 10:22:27 2011] Extracting stamp from image fullrun_ccd3_acisf11867_pi14-548_cl_sm2.00.img.gz, (101, 467) - (305, 671)
[Thu Oct 20 10:22:27 2011] Writing fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 10:22:27 2011] ../../acisf11867/products/events/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.evt and ../../acisf11867/products/events/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 10:22:27 2011] Size of ../../acisf11867/products/events/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2256 counts
[Thu Oct 20 10:22:27 2011] Mean chipx,y = (183.02, 480.67)
[Thu Oct 20 10:22:27 2011] Mean tdetx,y = (4651.33, 3244.02)
[Thu Oct 20 10:22:27 2011] chipx,y range = (153.00-217.00, 448.00-510.00)
[Thu Oct 20 10:22:27 2011] Size of ../../acisf11867/products/events/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 76 counts
[Thu Oct 20 10:22:27 2011] ../../acisf11867/products/images/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.img and ../../acisf11867/products/images/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 10:22:27 2011] ../../acisf11867/products/spectra/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.pi and ../../acisf11867/products/spectra/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 10:22:30 2011] ../../acisf11867/products/lightcurves/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.lc and ../../acisf11867/products/lightcurves/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 10:22:44 2011] Keeping rmf generated by specextract
[Thu Oct 20 10:22:44 2011] 164.781
[Thu Oct 20 10:22:46 2011] Updating aperture counts using extracted products
[Thu Oct 20 10:22:46 2011] Error reading totcts from fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 10:22:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 10:22:46 2011] Using photon index=1.80, rate=0.122, arf fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 10:22:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 10:22:46 2011] Updating source flux to 1.8e-12
[Thu Oct 20 10:23:00 2011] Reading fit data from acisf11867/analysis//spectral/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 20 10:23:00 2011] Spectral fit parameter nH value = 2.18141e+13
[Thu Oct 20 10:23:00 2011] Spectral fit parameter PhoIndex value = 1.92792
[Thu Oct 20 10:23:00 2011] Failed to get F(0.3-8.0) from acisf11867/analysis//spectral/fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 10:23:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 10:23:00 2011] Using Nh = 2.2e+13, photon index=1.93, rate=0.122, arf fullrun_ccd3_acisf11867_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 10:23:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 10:23:00 2011] Updating source flux to 1.8e-12