[Wed Oct  5 07:19:37 2011] Detection parameters:
  Position = (462.4, 1025.8) = 23 59 43.00 -50 6 11.4
  Extent = 0.5" x 0.5", rotation angle = 13 degrees
  Source counts = 54.1 +/- 7.4
  Background counts = 0.9
  Rate = 0.003 +/- 0.0004

[Wed Oct  5 07:19:40 2011] Off-axis axis estimate = 3.68'
[Wed Oct  5 07:20:42 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 07:20:42 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Wed Oct  5 07:20:42 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Wed Oct  5 07:20:42 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.74"
[Wed Oct  5 07:20:43 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct  5 07:20:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11864_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 07:20:43 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct  5 07:20:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11864_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 07:20:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11864_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11864_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 07:20:43 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 07:20:43 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 07:20:43 2011] Fit fullrun_ccd3_acisf11864_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 07:20:52 2011] Spatial fit model total counts = 55.342400, observed total counts = 57.000000
[Wed Oct  5 07:20:52 2011] Offset between fit and detection position for source 2 = 0.865559 pixels
[Wed Oct  5 07:20:52 2011] 54.645755 total counts/ 0.002355 bgd. counts: snr = 1125.995684
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.865559 pixels
  Position = (463.0, 1026.5) = 0 0 -17.00 -50 6 11.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 54.6 +/- 7.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0004
[Wed Oct  5 07:20:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 07:20:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 07:20:52 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 07:20:52 2011] Source does appear to be extended
[Wed Oct  5 07:20:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 07:21:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 07:21:12 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Wed Oct  5 07:21:12 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.794
[Wed Oct  5 07:21:12 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.71"
[Wed Oct  5 07:21:12 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 07:21:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11864_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 07:21:12 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 07:21:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11864_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 07:21:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11864_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11864_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 07:21:12 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 07:21:12 2011] fullrun_ccd3_acisf11864_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 07:21:12 2011] Fit fullrun_ccd3_acisf11864_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 07:21:19 2011] Spatial fit model total counts = 53.792600, observed total counts = 57.000000
[Wed Oct  5 07:21:19 2011] Offset between fit and detection position for source 2 = 0.010165 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.010165 pixels
  Position = (463.0, 1026.4) = 0 0 -17.00 -50 6 11.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 52.9 +/- 7.3
  Background counts = 0.0
  Rate = 0.003 +/- 0.0004
[Wed Oct  5 07:21:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 07:21:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 07:21:19 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 07:21:19 2011] Source does appear to be extended
[Wed Oct  5 07:21:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 07:29:31 2011] Not overwriting source region fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.reg
[Wed Oct  5 07:29:31 2011] Extracting stamp from image fullrun_ccd3_acisf11864_pi14-548_cl_sm2.00.img.gz, (430, 994) - (496, 1059)
[Wed Oct  5 07:29:31 2011] Writing fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2.gif
[Wed Oct  5 07:29:39 2011] ../../acisf11864/products/events/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.evt and ../../acisf11864/products/events/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct  5 07:29:39 2011] Size of ../../acisf11864/products/events/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.evt.gz[events] = 54 counts
[Wed Oct  5 07:29:39 2011] Mean chipx,y = (227.96, 811.81)
[Wed Oct  5 07:29:39 2011] Mean tdetx,y = (4320.19, 3288.96)
[Wed Oct  5 07:29:39 2011] chipx,y range = (208.00-245.00, 796.00-830.00)
[Wed Oct  5 07:29:39 2011] Size of ../../acisf11864/products/events/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 12 counts
[Wed Oct  5 07:29:39 2011] ../../acisf11864/products/images/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.img and ../../acisf11864/products/images/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct  5 07:29:39 2011] ../../acisf11864/products/spectra/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.pi and ../../acisf11864/products/spectra/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct  5 07:29:39 2011] Not generating rmf since there are only 52 counts
[Wed Oct  5 07:29:45 2011] ../../acisf11864/products/lightcurves/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.lc and ../../acisf11864/products/lightcurves/fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct  5 07:31:22 2011] 187.71
[Wed Oct  5 07:31:52 2011] Updating aperture counts using extracted products
[Wed Oct  5 07:31:52 2011] Error reading totcts from fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct  5 07:31:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 07:31:52 2011] Using photon index=1.80, rate=0.00268, arf fullrun_ccd3_acisf11864_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 07:31:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 07:31:52 2011] Updating source flux to 3.5e-14
[Wed Oct  5 07:32:10 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting