[Mon Sep 26 06:25:04 2011] Detection parameters:
  Position = (746.7, 180.1) = 13 25 24.77 -43 2 49.8
  Extent = 0.5" x 0.5", rotation angle = 11 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.002 +/- 0.0007

[Mon Sep 26 06:25:05 2011] Off-axis axis estimate = 3.31'
[Mon Sep 26 06:25:59 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 06:25:59 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Mon Sep 26 06:25:59 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.910
[Mon Sep 26 06:25:59 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.65"
[Mon Sep 26 06:26:01 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src28.ximg exists
[Mon Sep 26 06:26:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 06:26:01 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Sep 26 06:26:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 06:26:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:26:02 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Sep 26 06:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src28.csv
[Mon Sep 26 06:26:02 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Sep 26 06:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src28.csv
[Mon Sep 26 06:26:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:26:14 2011] Spatial fit model total counts = 10.881800, observed total counts = 12.000000
[Mon Sep 26 06:26:14 2011] Offset between fit and detection position for source 35 = 0.659771 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.659771 pixels
  Position = (747.1, 180.6) = 13 25 24.77 -43 2 49.8
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0007
[Mon Sep 26 06:26:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 06:26:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 06:26:14 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 06:26:14 2011] Source does appear to be extended
[Mon Sep 26 06:26:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 06:26:14 2011] Deleting source due to low Poisson probability 0.9