[Mon Sep 26 06:25:03 2011] Detection parameters:
  Position = (686.2, 346.6) = 13 25 27.49 -43 1 27.9
  Extent = 0.5" x 0.5", rotation angle = 7 degrees
  Source counts = 15.6 +/- 4.6
  Background counts = 5.4
  Rate = 0.003 +/- 0.001

[Mon Sep 26 06:25:05 2011] Off-axis axis estimate = 3.56'
[Mon Sep 26 06:25:59 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 06:25:59 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Sep 26 06:25:59 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.062
[Mon Sep 26 06:25:59 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.71"
[Mon Sep 26 06:26:00 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src22.ximg exists
[Mon Sep 26 06:26:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 06:26:00 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Sep 26 06:26:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src22.csv
[Mon Sep 26 06:26:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11846_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:26:02 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Sep 26 06:26:02 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Sep 26 06:26:02 2011] Fit fullrun_ccd3_acisf11846_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Sep 26 06:26:14 2011] Source 15 is offset by -5.596159 and -6.167448 pixels which is larger than
2 X fitted extent = 0.720333 x 0.720333, not incorporating fit results
[Mon Sep 26 06:26:14 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 06:26:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 06:26:14 2011] Assessing source extent using major
[Mon Sep 26 06:26:14 2011] Source does appear to be extended
[Mon Sep 26 06:26:14 2011] Computing asymmetry using major and minor axis, asym = 1.10
[Mon Sep 26 06:26:53 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 06:26:53 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Sep 26 06:26:53 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.062
[Mon Sep 26 06:26:53 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.71"
[Mon Sep 26 06:26:54 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass1_src20.ximg exists
[Mon Sep 26 06:26:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass1_src20.csv
[Mon Sep 26 06:26:54 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass1_src20_1.ximg exists
[Mon Sep 26 06:26:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11846_pi14-548_cl_pass1_src20.csv
[Mon Sep 26 06:26:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11846_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11846_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 06:26:55 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Mon Sep 26 06:26:55 2011] fullrun_ccd3_acisf11846_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Sep 26 06:26:55 2011] Fit fullrun_ccd3_acisf11846_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Sep 26 06:27:04 2011] Spatial fit model total counts = 47.993600, observed total counts = 48.000000
[Mon Sep 26 06:27:04 2011] Offset between fit and detection position for source 15 = 1.038676 pixels
[Mon Sep 26 06:27:04 2011] 46.716900 total counts/ 30.914900 bgd. counts: snr = 2.842027
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.038676 pixels
  Position = (687.1, 347.1) = 13 25 27.47 -43 1 27.9
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 15.8 +/- 6.8
  Background counts = 30.9
  Rate = 0.003 +/- 0.001
[Mon Sep 26 06:27:04 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 06:27:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 06:27:04 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 06:27:04 2011] Source does appear to be extended
[Mon Sep 26 06:27:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 06:40:13 2011] Not overwriting source region fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_src.reg
[Mon Sep 26 06:40:13 2011] Extracting stamp from image fullrun_ccd3_acisf11846_pi14-548_cl_sm2.00.img.gz, (662, 322) - (712, 372)
[Mon Sep 26 06:40:13 2011] Writing fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15.gif
[Mon Sep 26 06:51:22 2011] ../../acisf11846/products/events/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_src.evt and ../../acisf11846/products/events/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Mon Sep 26 06:51:22 2011] Size of ../../acisf11846/products/events/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_src.evt.gz[events] = 21 counts
[Mon Sep 26 06:51:22 2011] Mean chipx,y = (820.67, 609.24)
[Mon Sep 26 06:51:22 2011] Mean tdetx,y = (4522.76, 3881.67)
[Mon Sep 26 06:51:22 2011] chipx,y range = (800.00-833.00, 594.00-628.00)
[Mon Sep 26 06:51:23 2011] Size of ../../acisf11846/products/events/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 92 counts
[Mon Sep 26 06:51:23 2011] ../../acisf11846/products/images/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_src.img and ../../acisf11846/products/images/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Mon Sep 26 06:51:23 2011] Not generating rmf since there are only 15 counts
[Mon Sep 26 06:51:23 2011] arf not found, will run specextract
[Mon Sep 26 06:51:53 2011] ../../acisf11846/products/spectra/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15.warf not found
[Mon Sep 26 06:51:53 2011] ../../acisf11846/products/spectra/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15.wrmf not found
[Mon Sep 26 06:51:53 2011] Removal of ../../acisf11846/products/spectra/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15.soff failed
[Mon Sep 26 06:51:59 2011] ../../acisf11846/products/lightcurves/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_src.lc and ../../acisf11846/products/lightcurves/fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Mon Sep 26 06:53:43 2011] Spectrum 15 has only 16 counts, deleting rmf
[Mon Sep 26 06:53:43 2011] 194.743
[Mon Sep 26 06:54:00 2011] Updating aperture counts using extracted products
[Mon Sep 26 06:54:00 2011] Error reading totcts from fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15_src.pi.gz
[Mon Sep 26 06:54:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 06:54:00 2011] Using photon index=1.80, rate=0.00337, arf fullrun_ccd3_acisf11846_pi14-548_pass1_cl_src15.arf
[Mon Sep 26 06:54:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 06:54:00 2011] Updating source flux to 3.9e-14
[Mon Sep 26 06:54:13 2011] Flag b found in src. 15 procflags, skipping spectral fitting
[Mon Sep 26 06:54:13 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting