[Mon Sep 26 20:11:49 2011] Detection parameters:
  Position = (1216.0, 622.1) = 15 4 51.00 25 58 59.4
  Extent = 0.6" x 0.5", rotation angle = 0 degrees
  Source counts = 16.5 +/- 4.5
  Background counts = 3.5
  Rate = 0.0003 +/- 8e-05

[Mon Sep 26 20:11:50 2011] Off-axis axis estimate = 3.31'
[Mon Sep 26 20:13:05 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 20:13:05 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Mon Sep 26 20:13:05 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.218
[Mon Sep 26 20:13:05 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.65"
[Mon Sep 26 20:13:06 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass0_src28.ximg exists
[Mon Sep 26 20:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11845_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 20:13:06 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Sep 26 20:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11845_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 20:13:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11845_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11845_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 20:13:07 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Sep 26 20:13:07 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Sep 26 20:13:07 2011] Fit fullrun_ccd7_acisf11845_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Sep 26 20:13:19 2011] Spatial fit model total counts = 33.999700, observed total counts = 34.000000
[Mon Sep 26 20:13:19 2011] Offset between fit and detection position for source 8 = 0.817068 pixels
[Mon Sep 26 20:13:19 2011] 34.506600 total counts/ 17.401100 bgd. counts: snr = 4.100600
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.817068 pixels
  Position = (1216.6, 622.6) = 15 4 51.00 25 58 59.3
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 17.1 +/- 5.9
  Background counts = 17.4
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 20:13:19 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 20:13:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 20:13:19 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 20:13:19 2011] Source does appear to be extended
[Mon Sep 26 20:13:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 20:13:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 20:13:41 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Mon Sep 26 20:13:41 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.730
[Mon Sep 26 20:13:41 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.62"
[Mon Sep 26 20:13:42 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass1_src28.ximg exists
[Mon Sep 26 20:13:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11845_pi14-548_cl_pass1_src28.csv
[Mon Sep 26 20:13:42 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Sep 26 20:13:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11845_pi14-548_cl_pass1_src28.csv
[Mon Sep 26 20:13:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11845_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11845_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 20:13:43 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Sep 26 20:13:43 2011] fullrun_ccd7_acisf11845_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Sep 26 20:13:43 2011] Fit fullrun_ccd7_acisf11845_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Sep 26 20:13:55 2011] Spatial fit model total counts = 33.999700, observed total counts = 34.000000
[Mon Sep 26 20:13:55 2011] Offset between fit and detection position for source 8 = 0.000953 pixels
[Mon Sep 26 20:13:55 2011] 34.506400 total counts/ 17.394800 bgd. counts: snr = 4.102805
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.000953 pixels
  Position = (1216.6, 622.6) = 15 4 51.00 25 58 59.3
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 17.1 +/- 5.9
  Background counts = 17.4
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 20:13:55 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 20:13:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 20:13:55 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 20:13:55 2011] Source does appear to be extended
[Mon Sep 26 20:13:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 20:16:20 2011] Not overwriting source region fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.reg
[Mon Sep 26 20:16:20 2011] Extracting stamp from image fullrun_ccd7_acisf11845_pi14-548_cl_sm2.00.img.gz, (1188, 594) - (1245, 651)
[Mon Sep 26 20:16:20 2011] Writing fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8.gif
[Mon Sep 26 20:18:21 2011] ../../acisf11845/products/events/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.evt and ../../acisf11845/products/events/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Mon Sep 26 20:18:21 2011] Size of ../../acisf11845/products/events/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.evt.gz[events] = 20 counts
[Mon Sep 26 20:18:21 2011] Mean chipx,y = (234.20, 100.35)
[Mon Sep 26 20:18:21 2011] Mean tdetx,y = (4151.20, 1802.35)
[Mon Sep 26 20:18:21 2011] chipx,y range = (221.00-253.00, 79.00-115.00)
[Mon Sep 26 20:18:21 2011] Size of ../../acisf11845/products/events/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 67 counts
[Mon Sep 26 20:18:21 2011] ../../acisf11845/products/images/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.img and ../../acisf11845/products/images/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Mon Sep 26 20:18:21 2011] ../../acisf11845/products/spectra/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.pi and ../../acisf11845/products/spectra/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Mon Sep 26 20:18:21 2011] Not generating rmf since there are only 17 counts
[Mon Sep 26 20:18:24 2011] ../../acisf11845/products/lightcurves/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.lc and ../../acisf11845/products/lightcurves/fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Mon Sep 26 20:18:51 2011] 220.822
[Mon Sep 26 20:18:55 2011] Updating aperture counts using extracted products
[Mon Sep 26 20:18:55 2011] Error reading totcts from fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8_src.pi.gz
[Mon Sep 26 20:18:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 20:18:56 2011] Using photon index=1.80, rate=0.000297, arf fullrun_ccd7_acisf11845_pi14-548_pass1_cl_src8.arf
[Mon Sep 26 20:18:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 20:18:56 2011] Updating source flux to 2.5e-15
[Mon Sep 26 20:19:27 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting