[Fri Sep 30 20:30:02 2011] Detection parameters:
  Position = (154.8, 597.1) = 17 45 37.17 -29 3 34.4
  Extent = 0.7" x 0.5", rotation angle = 21 degrees
  Source counts = 27.0 +/- 5.7
  Background counts = 6.0
  Rate = 0.0003 +/- 7e-05

[Fri Sep 30 20:30:09 2011] Off-axis axis estimate = 3.63'
[Fri Sep 30 20:32:58 2011] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:58 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Fri Sep 30 20:32:58 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.024
[Fri Sep 30 20:32:58 2011] Giving source the simple spatial ID 60 for pass 0, mean size = 0.73"
[Fri Sep 30 20:33:04 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src60.ximg exists
[Fri Sep 30 20:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src60.csv
[Fri Sep 30 20:33:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src60_1.ximg exists
[Fri Sep 30 20:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src60.csv
[Fri Sep 30 20:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:33:11 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src60.ximg exists
[Fri Sep 30 20:33:11 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Sep 30 20:33:11 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src60 appears to have run properly
[Fri Sep 30 20:34:04 2011] Spatial fit model total counts = 47.000000, observed total counts = 47.000000
[Fri Sep 30 20:34:04 2011] Offset between fit and detection position for source 9 = 0.682535 pixels
[Fri Sep 30 20:34:04 2011] 46.887300 total counts/ 18.843800 bgd. counts: snr = 6.460230
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.682535 pixels
  Position = (155.2, 597.6) = 17 45 37.17 -29 3 34.4
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 28.0 +/- 6.8
  Background counts = 18.8
  Rate = 0.0004 +/- 9e-05
[Fri Sep 30 20:34:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:34:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:34:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:34:04 2011] Source does appear to be extended
[Fri Sep 30 20:34:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:57 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Sep 30 20:34:57 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.150
[Fri Sep 30 20:34:57 2011] Giving source the simple spatial ID 56 for pass 1, mean size = 0.67"
[Fri Sep 30 20:35:02 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src56.ximg exists
[Fri Sep 30 20:35:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src56.csv
[Fri Sep 30 20:35:02 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src56_1.ximg exists
[Fri Sep 30 20:35:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src56.csv
[Fri Sep 30 20:35:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:35:06 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src56.ximg exists
[Fri Sep 30 20:35:06 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src56_1.ximg exists
[Fri Sep 30 20:35:06 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src56 appears to have run properly
[Fri Sep 30 20:35:52 2011] Spatial fit model total counts = 46.999900, observed total counts = 47.000000
[Fri Sep 30 20:35:52 2011] Offset between fit and detection position for source 9 = 0.000118 pixels
[Fri Sep 30 20:35:52 2011] 46.887000 total counts/ 18.836900 bgd. counts: snr = 6.462934
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.000118 pixels
  Position = (155.2, 597.6) = 17 45 37.17 -29 3 34.4
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 28.1 +/- 6.8
  Background counts = 18.8
  Rate = 0.0004 +/- 9e-05
[Fri Sep 30 20:35:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:52 2011] Source does appear to be extended
[Fri Sep 30 20:35:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:46:55 2011] Not overwriting source region fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.reg
[Fri Sep 30 20:46:55 2011] Extracting stamp from image fullrun_ccd3_acisf11843_pi14-548_cl_sm2.00.img.gz, (124, 567) - (186, 628)
[Fri Sep 30 20:46:55 2011] Writing fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9.gif
[Fri Sep 30 20:49:30 2011] ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.evt and ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Sep 30 20:49:30 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.evt.gz[events] = 34 counts
[Fri Sep 30 20:49:30 2011] Mean chipx,y = (956.62, 582.85)
[Fri Sep 30 20:49:30 2011] Mean tdetx,y = (4549.15, 4017.62)
[Fri Sep 30 20:49:30 2011] chipx,y range = (939.00-973.00, 568.00-601.00)
[Fri Sep 30 20:49:30 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 86 counts
[Fri Sep 30 20:49:30 2011] ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.img and ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Sep 30 20:49:30 2011] ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.pi and ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Sep 30 20:49:30 2011] Not generating rmf since there are only 28 counts
[Fri Sep 30 20:49:33 2011] ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Sep 30 20:50:08 2011] 196.23
[Fri Sep 30 20:50:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:20 2011] Error reading totcts from fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Sep 30 20:50:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:21 2011] Using photon index=1.80, rate=0.000355, arf fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src9.arf
[Fri Sep 30 20:50:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:21 2011] Updating source flux to 5.6e-15
[Fri Sep 30 20:51:11 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting