[Fri Sep 30 20:30:06 2011] Detection parameters:
  Position = (63.7, 995.3) = 17 45 40.58 -29 0 18.5
  Extent = 0.7" x 0.6", rotation angle = 160 degrees
  Source counts = 107.8 +/- 15.8
  Background counts = 142.2
  Rate = 0.001 +/- 0.0002

[Fri Sep 30 20:30:09 2011] Off-axis axis estimate = 0.38'
[Fri Sep 30 20:32:58 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:58 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Sep 30 20:32:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.309
[Fri Sep 30 20:32:58 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.40"
[Fri Sep 30 20:33:03 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src14.ximg exists
[Fri Sep 30 20:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src14.csv
[Fri Sep 30 20:33:03 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Sep 30 20:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src14.csv
[Fri Sep 30 20:33:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:33:08 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Sep 30 20:33:08 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Sep 30 20:33:08 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Sep 30 20:34:04 2011] Spatial fit model total counts = 499.572000, observed total counts = 502.000000
[Fri Sep 30 20:34:04 2011] Offset between fit and detection position for source 85 = 0.757195 pixels
[Fri Sep 30 20:34:04 2011] 493.517500 total counts/ 446.342000 bgd. counts: snr = 2.232969
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.757195 pixels
  Position = (64.5, 995.4) = 17 45 40.57 -29 0 18.7
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 47.2 +/- 22.2
  Background counts = 446.3
  Rate = 0.0006 +/- 0.0003
[Fri Sep 30 20:34:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:34:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:34:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:34:04 2011] Source does appear to be extended
[Fri Sep 30 20:34:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:57 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Fri Sep 30 20:34:57 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.695
[Fri Sep 30 20:34:57 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.64"
[Fri Sep 30 20:34:59 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src14.ximg exists
[Fri Sep 30 20:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src14.csv
[Fri Sep 30 20:34:59 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src14_1.ximg exists
[Fri Sep 30 20:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src14.csv
[Fri Sep 30 20:34:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:35:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri Sep 30 20:35:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Sep 30 20:35:05 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Sep 30 20:35:52 2011] Spatial fit model total counts = 499.705000, observed total counts = 502.000000
[Fri Sep 30 20:35:52 2011] Offset between fit and detection position for source 85 = 0.000905 pixels
[Fri Sep 30 20:35:52 2011] 493.652800 total counts/ 446.455000 bgd. counts: snr = 2.233741
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.000905 pixels
  Position = (64.5, 995.4) = 17 45 40.57 -29 0 18.7
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 47.2 +/- 22.2
  Background counts = 446.5
  Rate = 0.0006 +/- 0.0003
[Fri Sep 30 20:35:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:52 2011] Source does appear to be extended
[Fri Sep 30 20:35:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:46:55 2011] Not overwriting source region fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.reg
[Fri Sep 30 20:46:55 2011] Extracting stamp from image fullrun_ccd3_acisf11843_pi14-548_cl_sm2.00.img.gz, (35, 966) - (94, 1025)
[Fri Sep 30 20:46:55 2011] Writing fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85.gif
[Fri Sep 30 20:47:39 2011] ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.evt and ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_bgd.evt exist, delete to re-create
[Fri Sep 30 20:47:39 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.evt.gz[events] = 211 counts
[Fri Sep 30 20:47:39 2011] Mean chipx,y = (980.91, 993.81)
[Fri Sep 30 20:47:39 2011] Mean tdetx,y = (4138.19, 4041.91)
[Fri Sep 30 20:47:39 2011] chipx,y range = (961.00-1002.00, 973.00-1015.00)
[Fri Sep 30 20:47:39 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_bgd.evt.gz[events] = 1127 counts
[Fri Sep 30 20:47:39 2011] ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.img and ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_bgd.img exist, delete to re-create
[Fri Sep 30 20:47:39 2011] ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.pi and ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_bgd.pi exist, delete to re-create
[Fri Sep 30 20:47:39 2011] Not generating rmf since there are only 47 counts
[Fri Sep 30 20:47:42 2011] ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_bgd.lc exist, delete to re-create
[Fri Sep 30 20:50:07 2011] 202.944
[Fri Sep 30 20:50:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:20 2011] Error reading totcts from fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85_src.pi.gz
[Fri Sep 30 20:50:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:20 2011] Using photon index=1.80, rate=0.000598, arf fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src85.arf
[Fri Sep 30 20:50:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:20 2011] Updating source flux to 9.1e-15
[Fri Sep 30 20:51:11 2011] Source 85 has fewer than 100.000000 counts, skipping spectral fitting