[Fri Sep 30 20:30:05 2011] Detection parameters:
  Position = (161.5, 952.1) = 17 45 36.92 -29 0 39.7
  Extent = 0.7" x 0.6", rotation angle = 51 degrees
  Source counts = 87.3 +/- 11.0
  Background counts = 33.7
  Rate = 0.001 +/- 0.0001

[Fri Sep 30 20:30:09 2011] Off-axis axis estimate = 0.91'
[Fri Sep 30 20:32:58 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:58 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 20:32:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Fri Sep 30 20:32:58 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.38"
[Fri Sep 30 20:33:03 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src17.ximg exists
[Fri Sep 30 20:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src17.csv
[Fri Sep 30 20:33:03 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Sep 30 20:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src17.csv
[Fri Sep 30 20:33:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:33:08 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Sep 30 20:33:08 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Sep 30 20:33:08 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Sep 30 20:34:04 2011] Spatial fit model total counts = 188.999000, observed total counts = 189.000000
[Fri Sep 30 20:34:04 2011] Offset between fit and detection position for source 68 = 1.203370 pixels
[Fri Sep 30 20:34:04 2011] 193.718800 total counts/ 110.820000 bgd. counts: snr = 7.874793
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 1.203370 pixels
  Position = (162.2, 953.1) = 17 45 36.91 -29 0 39.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 82.9 +/- 13.9
  Background counts = 110.8
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 20:34:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:34:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:34:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:34:04 2011] Source does appear to be extended
[Fri Sep 30 20:34:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:57 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 30 20:34:57 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.080
[Fri Sep 30 20:34:57 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.57"
[Fri Sep 30 20:34:59 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src17.ximg exists
[Fri Sep 30 20:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src17.csv
[Fri Sep 30 20:34:59 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Sep 30 20:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src17.csv
[Fri Sep 30 20:34:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:35:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Sep 30 20:35:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Sep 30 20:35:05 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Sep 30 20:35:52 2011] Spatial fit model total counts = 191.999000, observed total counts = 192.000000
[Fri Sep 30 20:35:52 2011] Offset between fit and detection position for source 68 = 0.026446 pixels
[Fri Sep 30 20:35:52 2011] 192.855600 total counts/ 109.322000 bgd. counts: snr = 7.989276
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.026446 pixels
  Position = (162.2, 953.1) = 17 45 36.91 -29 0 39.5
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 83.5 +/- 13.9
  Background counts = 109.3
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 20:35:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:52 2011] Source does appear to be extended
[Fri Sep 30 20:35:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:46:55 2011] Not overwriting source region fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.reg
[Fri Sep 30 20:46:55 2011] Extracting stamp from image fullrun_ccd3_acisf11843_pi14-548_cl_sm2.00.img.gz, (136, 927) - (188, 979)
[Fri Sep 30 20:46:55 2011] Writing fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68.gif
[Fri Sep 30 20:47:48 2011] ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.evt and ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_bgd.evt exist, delete to re-create
[Fri Sep 30 20:47:48 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.evt.gz[events] = 115 counts
[Fri Sep 30 20:47:48 2011] Mean chipx,y = (890.55, 935.98)
[Fri Sep 30 20:47:48 2011] Mean tdetx,y = (4196.02, 3951.55)
[Fri Sep 30 20:47:48 2011] chipx,y range = (873.00-911.00, 918.00-955.00)
[Fri Sep 30 20:47:48 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_bgd.evt.gz[events] = 297 counts
[Fri Sep 30 20:47:48 2011] ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.img and ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_bgd.img exist, delete to re-create
[Fri Sep 30 20:47:48 2011] ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.pi and ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_bgd.pi exist, delete to re-create
[Fri Sep 30 20:47:48 2011] Not generating rmf since there are only 83 counts
[Fri Sep 30 20:47:50 2011] ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_bgd.lc exist, delete to re-create
[Fri Sep 30 20:50:07 2011] 201.26
[Fri Sep 30 20:50:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:20 2011] Error reading totcts from fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68_src.pi.gz
[Fri Sep 30 20:50:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:20 2011] Using photon index=1.80, rate=0.00106, arf fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src68.arf
[Fri Sep 30 20:50:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:20 2011] Updating source flux to 1.6e-14
[Fri Sep 30 20:51:11 2011] Source 68 has fewer than 100.000000 counts, skipping spectral fitting