[Fri Sep 30 20:30:04 2011] Detection parameters:
  Position = (274.6, 872.4) = 17 45 32.68 -29 1 18.9
  Extent = 0.5" x 0.5", rotation angle = 157 degrees
  Source counts = 131.6 +/- 12.2
  Background counts = 18.4
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 20:30:09 2011] Off-axis axis estimate = 2.03'
[Fri Sep 30 20:32:58 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:58 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Sep 30 20:32:58 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.182
[Fri Sep 30 20:32:58 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.43"
[Fri Sep 30 20:33:03 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src10.ximg exists
[Fri Sep 30 20:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src10.csv
[Fri Sep 30 20:33:03 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Sep 30 20:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src10.csv
[Fri Sep 30 20:33:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:33:08 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 30 20:33:08 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 30 20:33:08 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 30 20:34:04 2011] Spatial fit model total counts = 169.000000, observed total counts = 169.000000
[Fri Sep 30 20:34:04 2011] Offset between fit and detection position for source 52 = 0.682517 pixels
[Fri Sep 30 20:34:04 2011] 168.712300 total counts/ 53.124300 bgd. counts: snr = 15.858647
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.682517 pixels
  Position = (275.1, 872.9) = 17 45 32.68 -29 1 18.9
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 115.6 +/- 13.0
  Background counts = 53.1
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 20:34:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:34:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:34:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:34:04 2011] Source does appear to be extended
[Fri Sep 30 20:34:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:57 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Sep 30 20:34:57 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.731
[Fri Sep 30 20:34:57 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.46"
[Fri Sep 30 20:34:59 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src10.ximg exists
[Fri Sep 30 20:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src10.csv
[Fri Sep 30 20:34:59 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Sep 30 20:34:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src10.csv
[Fri Sep 30 20:34:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:35:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 30 20:35:05 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 30 20:35:05 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 30 20:35:52 2011] Spatial fit model total counts = 167.000000, observed total counts = 167.000000
[Fri Sep 30 20:35:52 2011] Offset between fit and detection position for source 52 = 0.005075 pixels
[Fri Sep 30 20:35:52 2011] 165.861900 total counts/ 49.835900 bgd. counts: snr = 16.435547
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.005075 pixels
  Position = (275.1, 872.9) = 17 45 32.68 -29 1 18.9
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 116.0 +/- 12.9
  Background counts = 49.8
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 20:35:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:52 2011] Source does appear to be extended
[Fri Sep 30 20:35:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:46:55 2011] Not overwriting source region fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.reg
[Fri Sep 30 20:46:55 2011] Extracting stamp from image fullrun_ccd3_acisf11843_pi14-548_cl_sm2.00.img.gz, (254, 852) - (296, 894)
[Fri Sep 30 20:46:55 2011] Writing fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52.gif
[Fri Sep 30 20:47:27 2011] ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.evt and ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Fri Sep 30 20:47:27 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.evt.gz[events] = 128 counts
[Fri Sep 30 20:47:27 2011] Mean chipx,y = (793.30, 837.59)
[Fri Sep 30 20:47:27 2011] Mean tdetx,y = (4294.41, 3854.30)
[Fri Sep 30 20:47:27 2011] chipx,y range = (775.00-811.00, 820.00-855.00)
[Fri Sep 30 20:47:27 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 88 counts
[Fri Sep 30 20:47:27 2011] ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.img and ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Fri Sep 30 20:47:27 2011] ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.pi and ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Fri Sep 30 20:47:30 2011] ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Fri Sep 30 20:50:06 2011] Keeping rmf generated by specextract
[Fri Sep 30 20:50:06 2011] 199.446
[Fri Sep 30 20:50:19 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:19 2011] Error reading totcts from fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52_src.pi.gz
[Fri Sep 30 20:50:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:20 2011] Using photon index=1.80, rate=0.00147, arf fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src52.arf
[Fri Sep 30 20:50:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:20 2011] Updating source flux to 2.3e-14