[Fri Sep 30 20:30:08 2011] Detection parameters:
  Position = (340.7, 854.7) = 17 45 30.20 -29 1 27.6
  Extent = 1.1" x 0.5", rotation angle = 171 degrees
  Source counts = 18.5 +/- 5.1
  Background counts = 7.5
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 20:30:09 2011] Off-axis axis estimate = 2.55'
[Fri Sep 30 20:32:58 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:58 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Sep 30 20:32:58 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.980
[Fri Sep 30 20:32:58 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 0.50"
[Fri Sep 30 20:33:07 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src87.ximg exists
[Fri Sep 30 20:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src87.csv
[Fri Sep 30 20:33:07 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src87_1.ximg exists
[Fri Sep 30 20:33:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src87.csv
[Fri Sep 30 20:33:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:33:11 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Fri Sep 30 20:33:12 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Fri Sep 30 20:33:12 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Fri Sep 30 20:34:04 2011] Spatial fit model total counts = 46.995000, observed total counts = 47.000000
[Fri Sep 30 20:34:04 2011] Offset between fit and detection position for source 122 = 1.162100 pixels
[Fri Sep 30 20:34:04 2011] 46.702100 total counts/ 16.056600 bgd. counts: snr = 7.647860
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 1.162100 pixels
  Position = (339.5, 854.7) = 17 45 30.26 -29 1 27.9
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 30.6 +/- 6.8
  Background counts = 16.1
  Rate = 0.0004 +/- 9e-05
[Fri Sep 30 20:34:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:34:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:34:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:34:04 2011] Source does appear to be extended
[Fri Sep 30 20:34:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:57 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Fri Sep 30 20:34:57 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.857
[Fri Sep 30 20:34:57 2011] Giving source the simple spatial ID 71 for pass 1, mean size = 1.21"
[Fri Sep 30 20:35:04 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src71.ximg exists
[Fri Sep 30 20:35:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src71.csv
[Fri Sep 30 20:35:04 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src71_1.ximg exists
[Fri Sep 30 20:35:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src71.csv
[Fri Sep 30 20:35:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11843_pi14-548_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:35:06 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src71.ximg exists
[Fri Sep 30 20:35:06 2011] fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src71_1.ximg exists
[Fri Sep 30 20:35:06 2011] Fit fullrun_ccd3_acisf11843_pi14-548_cl_pass1_tfrozen_src71 appears to have run properly
[Fri Sep 30 20:35:52 2011] Spatial fit model total counts = 66.998600, observed total counts = 67.000000
[Fri Sep 30 20:35:52 2011] Offset between fit and detection position for source 122 = 0.478775 pixels
[Fri Sep 30 20:35:52 2011] 67.855200 total counts/ 45.244300 bgd. counts: snr = 3.361522
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 0.478775 pixels
  Position = (339.8, 854.3) = 17 45 30.25 -29 1 28.1
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 22.6 +/- 8.2
  Background counts = 45.2
  Rate = 0.0003 +/- 0.0001
[Fri Sep 30 20:35:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:52 2011] Source does appear to be extended
[Fri Sep 30 20:35:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:46:56 2011] Not overwriting source region fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.reg
[Fri Sep 30 20:46:56 2011] Extracting stamp from image fullrun_ccd3_acisf11843_pi14-548_cl_sm2.00.img.gz, (297, 812) - (382, 897)
[Fri Sep 30 20:46:56 2011] Writing fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122.gif
[Fri Sep 30 20:49:52 2011] ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.evt and ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_bgd.evt exist, delete to re-create
[Fri Sep 30 20:49:52 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.evt.gz[events] = 41 counts
[Fri Sep 30 20:49:52 2011] Mean chipx,y = (736.73, 808.00)
[Fri Sep 30 20:49:52 2011] Mean tdetx,y = (4324.00, 3797.73)
[Fri Sep 30 20:49:52 2011] chipx,y range = (713.00-753.00, 788.00-829.00)
[Fri Sep 30 20:49:52 2011] Size of ../../acisf11843/products/events/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_bgd.evt.gz[events] = 253 counts
[Fri Sep 30 20:49:52 2011] ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.img and ../../acisf11843/products/images/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_bgd.img exist, delete to re-create
[Fri Sep 30 20:49:52 2011] ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.pi and ../../acisf11843/products/spectra/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_bgd.pi exist, delete to re-create
[Fri Sep 30 20:49:52 2011] Not generating rmf since there are only 22 counts
[Fri Sep 30 20:49:55 2011] ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_bgd.lc exist, delete to re-create
[Fri Sep 30 20:50:08 2011] 196.606
[Fri Sep 30 20:50:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:20 2011] Error reading totcts from fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122_src.pi.gz
[Fri Sep 30 20:50:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:21 2011] Using photon index=1.80, rate=0.000286, arf fullrun_ccd3_acisf11843_pi14-548_pass1_cl_src122.arf
[Fri Sep 30 20:50:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:21 2011] Updating source flux to 4.5e-15
[Fri Sep 30 20:51:11 2011] Source 122 has fewer than 100.000000 counts, skipping spectral fitting