[Fri Sep 30 20:30:00 2011] Detection parameters:
  Position = (231.7, 513.8) = 17 45 40.36 -28 55 51.1
  Extent = 1.0" x 0.5", rotation angle = 124 degrees
  Source counts = 13.2 +/- 4.2
  Background counts = 4.8
  Rate = 0.0002 +/- 5e-05

[Fri Sep 30 20:30:01 2011] Off-axis axis estimate = 4.13'
[Fri Sep 30 20:32:49 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:49 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Sep 30 20:32:49 2011] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.631
[Fri Sep 30 20:32:49 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 0.87"
[Fri Sep 30 20:32:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src76.ximg exists
[Fri Sep 30 20:32:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src76.csv
[Fri Sep 30 20:32:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src76_1.ximg exists
[Fri Sep 30 20:32:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src76.csv
[Fri Sep 30 20:32:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:57 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src76.ximg exists
[Fri Sep 30 20:32:57 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src76_1.ximg exists
[Fri Sep 30 20:32:57 2011] Fit fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src76 appears to have run properly
[Fri Sep 30 20:33:51 2011] Spatial fit model total counts = 59.145300, observed total counts = 61.000000
[Fri Sep 30 20:33:51 2011] Offset between fit and detection position for source 94 = 2.972940 pixels
[Fri Sep 30 20:33:51 2011] 58.368000 total counts/ 14.925500 bgd. counts: snr = 11.244765
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 2.972940 pixels
  Position = (228.9, 514.9) = 17 45 40.48 -28 55 50.8
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 43.4 +/- 7.6
  Background counts = 14.9
  Rate = 0.0006 +/- 0.0001
[Fri Sep 30 20:33:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:51 2011] Source does appear to be extended
[Fri Sep 30 20:33:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:52 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Sep 30 20:34:52 2011] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.573
[Fri Sep 30 20:34:52 2011] Giving source the simple spatial ID 73 for pass 1, mean size = 1.13"
[Fri Sep 30 20:34:54 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src73.ximg exists
[Fri Sep 30 20:34:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src73.csv
[Fri Sep 30 20:34:54 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src73_1.ximg exists
[Fri Sep 30 20:34:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src73.csv
[Fri Sep 30 20:34:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_tfrozen_src73.ximg exists
[Fri Sep 30 20:34:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_tfrozen_src73_1.ximg exists
[Fri Sep 30 20:34:56 2011] Fit fullrun_ccd2_acisf11843_pi14-548_cl_pass1_tfrozen_src73 appears to have run properly
[Fri Sep 30 20:35:42 2011] Spatial fit model total counts = 55.029800, observed total counts = 60.000000
[Fri Sep 30 20:35:42 2011] Offset between fit and detection position for source 94 = 0.781320 pixels
[Fri Sep 30 20:35:42 2011] 54.982880 total counts/ 2.820880 bgd. counts: snr = 31.057174
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 0.781320 pixels
  Position = (229.2, 514.1) = 17 45 40.47 -28 55 51.1
  Extent = 1.4 (0.7-1.9)", rotation angle = 0
  Source counts = 52.2 +/- 7.4
  Background counts = 2.8
  Rate = 0.0007 +/- 9e-05
[Fri Sep 30 20:35:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:43 2011] Source does appear to be extended
[Fri Sep 30 20:35:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:42:01 2011] Not overwriting source region fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.reg
[Fri Sep 30 20:42:01 2011] Extracting stamp from image fullrun_ccd2_acisf11843_pi14-548_cl_sm2.00.img.gz, (166, 451) - (292, 577)
[Fri Sep 30 20:42:01 2011] Writing fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94.gif
[Fri Sep 30 20:46:19 2011] ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.evt and ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_bgd.evt exist, delete to re-create
[Fri Sep 30 20:46:19 2011] Size of ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.evt.gz[events] = 71 counts
[Fri Sep 30 20:46:19 2011] Mean chipx,y = (135.73, 539.11)
[Fri Sep 30 20:46:19 2011] Mean tdetx,y = (3600.11, 3950.27)
[Fri Sep 30 20:46:19 2011] chipx,y range = (110.00-160.00, 518.00-561.00)
[Fri Sep 30 20:46:19 2011] Size of ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_bgd.evt.gz[events] = 393 counts
[Fri Sep 30 20:46:19 2011] ../../acisf11843/products/images/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.img and ../../acisf11843/products/images/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_bgd.img exist, delete to re-create
[Fri Sep 30 20:46:19 2011] ../../acisf11843/products/spectra/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.pi and ../../acisf11843/products/spectra/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_bgd.pi exist, delete to re-create
[Fri Sep 30 20:46:19 2011] Not generating rmf since there are only 52 counts
[Fri Sep 30 20:46:21 2011] ../../acisf11843/products/lightcurves/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_bgd.lc exist, delete to re-create
[Fri Sep 30 20:46:54 2011] 173.429
[Fri Sep 30 20:50:18 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:18 2011] Error reading totcts from fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94_src.pi.gz
[Fri Sep 30 20:50:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:19 2011] Using photon index=1.80, rate=0.000661, arf fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src94.arf
[Fri Sep 30 20:50:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:19 2011] Updating source flux to 1.2e-14
[Fri Sep 30 20:51:06 2011] Source 94 has fewer than 100.000000 counts, skipping spectral fitting