[Fri Sep 30 20:29:58 2011] Detection parameters:
  Position = (568.2, 143.3) = 17 45 27.74 -28 58 53.3
  Extent = 0.9" x 0.5", rotation angle = 62 degrees
  Source counts = 18.1 +/- 5.1
  Background counts = 7.9
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 20:30:01 2011] Off-axis axis estimate = 2.83'
[Fri Sep 30 20:32:49 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:49 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Sep 30 20:32:49 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.865
[Fri Sep 30 20:32:49 2011] Giving source the simple spatial ID 60 for pass 0, mean size = 0.55"
[Fri Sep 30 20:32:55 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src60.ximg exists
[Fri Sep 30 20:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src60.csv
[Fri Sep 30 20:32:55 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src60_1.ximg exists
[Fri Sep 30 20:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src60.csv
[Fri Sep 30 20:32:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:57 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src60.ximg exists
[Fri Sep 30 20:32:57 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Sep 30 20:32:57 2011] Fit fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src60 appears to have run properly
[Fri Sep 30 20:33:51 2011] Spatial fit model total counts = 49.901000, observed total counts = 50.000000
[Fri Sep 30 20:33:51 2011] Offset between fit and detection position for source 35 = 0.614192 pixels
[Fri Sep 30 20:33:51 2011] 48.390600 total counts/ 31.758800 bgd. counts: snr = 2.951258
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.614192 pixels
  Position = (568.7, 143.8) = 17 45 27.74 -28 58 53.3
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 16.6 +/- 7.0
  Background counts = 31.8
  Rate = 0.0002 +/- 9e-05
[Fri Sep 30 20:33:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:51 2011] Source does appear to be extended
[Fri Sep 30 20:33:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:52 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Sep 30 20:34:52 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.044
[Fri Sep 30 20:34:52 2011] Giving source the simple spatial ID 59 for pass 1, mean size = 0.48"
[Fri Sep 30 20:34:54 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src59.ximg exists
[Fri Sep 30 20:34:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src59.csv
[Fri Sep 30 20:34:54 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src59_1.ximg exists
[Fri Sep 30 20:34:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src59.csv
[Fri Sep 30 20:34:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11843_pi14-548_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_tfrozen_src59.ximg exists
[Fri Sep 30 20:34:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Sep 30 20:34:56 2011] Fit fullrun_ccd2_acisf11843_pi14-548_cl_pass1_tfrozen_src59 appears to have run properly
[Fri Sep 30 20:35:42 2011] Spatial fit model total counts = 50.000000, observed total counts = 50.000000
[Fri Sep 30 20:35:42 2011] Offset between fit and detection position for source 35 = 0.025330 pixels
[Fri Sep 30 20:35:42 2011] 48.487200 total counts/ 31.603600 bgd. counts: snr = 3.003287
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.025330 pixels
  Position = (568.7, 143.8) = 17 45 27.74 -28 58 53.3
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 16.9 +/- 7.0
  Background counts = 31.6
  Rate = 0.0002 +/- 9e-05
[Fri Sep 30 20:35:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:43 2011] Source does appear to be extended
[Fri Sep 30 20:35:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:42:01 2011] Not overwriting source region fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.reg
[Fri Sep 30 20:42:01 2011] Extracting stamp from image fullrun_ccd2_acisf11843_pi14-548_cl_sm2.00.img.gz, (547, 122) - (591, 166)
[Fri Sep 30 20:42:01 2011] Writing fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35.gif
[Fri Sep 30 20:45:23 2011] ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.evt and ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Fri Sep 30 20:45:23 2011] Size of ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.evt.gz[events] = 22 counts
[Fri Sep 30 20:45:23 2011] Mean chipx,y = (406.64, 961.55)
[Fri Sep 30 20:45:23 2011] Mean tdetx,y = (4022.55, 3679.36)
[Fri Sep 30 20:45:23 2011] chipx,y range = (394.00-430.00, 943.00-979.00)
[Fri Sep 30 20:45:23 2011] Size of ../../acisf11843/products/events/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 72 counts
[Fri Sep 30 20:45:23 2011] ../../acisf11843/products/images/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.img and ../../acisf11843/products/images/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Fri Sep 30 20:45:23 2011] ../../acisf11843/products/spectra/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.pi and ../../acisf11843/products/spectra/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Fri Sep 30 20:45:23 2011] Not generating rmf since there are only 16 counts
[Fri Sep 30 20:45:26 2011] ../../acisf11843/products/lightcurves/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Fri Sep 30 20:46:53 2011] 190.668
[Fri Sep 30 20:50:18 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:18 2011] Error reading totcts from fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35_src.pi.gz
[Fri Sep 30 20:50:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:19 2011] Using photon index=1.80, rate=0.000214, arf fullrun_ccd2_acisf11843_pi14-548_pass1_cl_src35.arf
[Fri Sep 30 20:50:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:19 2011] Updating source flux to 3.4e-15
[Fri Sep 30 20:51:06 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting