[Fri Sep 30 20:29:56 2011] Detection parameters:
  Position = (344.7, 416.7) = 17 45 36.13 -28 56 38.9
  Extent = 0.8" x 0.6", rotation angle = 130 degrees
  Source counts = 453.2 +/- 21.7
  Background counts = 19.8
  Rate = 0.006 +/- 0.0003

[Fri Sep 30 20:30:01 2011] Off-axis axis estimate = 3.42'
[Fri Sep 30 20:32:49 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 20:32:49 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Sep 30 20:32:49 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.145
[Fri Sep 30 20:32:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.67"
[Fri Sep 30 20:32:54 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 20:32:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 20:32:54 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 20:32:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 20:32:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11843_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 20:32:56 2011] fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 20:32:56 2011] Fit fullrun_ccd2_acisf11843_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 20:33:51 2011] Spatial fit model total counts = 483.678000, observed total counts = 483.000000
[Fri Sep 30 20:33:51 2011] Offset between fit and detection position for source 1 = 7.144582 pixels
[Fri Sep 30 20:33:51 2011] 514.391037 total counts/ 514.391000 bgd. counts: snr = 0.000002
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.144582 pixels
  Position = (350.5, 412.5) = 17 45 35.93 -28 56 41.1
  Extent = 1.5 (0.2-2.8)", rotation angle = 0
  Source counts = 0.0 +/- 22.7
  Background counts = 514.4
  Rate = 5e-10 +/- 0.0003
  Deleting source due to low Poisson probability