[Fri Sep 30 20:29:55 2011] Detection parameters:
  Position = (801.6, 1136.4) = 17 45 51.58 -29 0 29.2
  Extent = 0.5" x 0.5", rotation angle = 102 degrees
  Source counts = 12.1 +/- 4.6
  Background counts = 8.9
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 20:29:56 2011] Off-axis axis estimate = 2.65'
[Fri Sep 30 20:32:43 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:43 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 30 20:32:43 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.937
[Fri Sep 30 20:32:43 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 0.52"
[Fri Sep 30 20:32:47 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src54.ximg exists
[Fri Sep 30 20:32:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src54.csv
[Fri Sep 30 20:32:47 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src54_1.ximg exists
[Fri Sep 30 20:32:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src54.csv
[Fri Sep 30 20:32:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:49 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_tfrozen_src54.ximg exists
[Fri Sep 30 20:32:49 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Sep 30 20:32:49 2011] Fit fullrun_ccd1_acisf11843_pi14-548_cl_pass0_tfrozen_src54 appears to have run properly
[Fri Sep 30 20:33:39 2011] Spatial fit model total counts = 45.416400, observed total counts = 44.000000
[Fri Sep 30 20:33:39 2011] Offset between fit and detection position for source 53 = 0.717680 pixels
[Fri Sep 30 20:33:39 2011] 45.299600 total counts/ 32.183200 bgd. counts: snr = 2.312065
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.717680 pixels
  Position = (802.0, 1137.0) = 17 45 51.58 -29 0 29.2
  Extent = 0.6 (0.2-1.1)", rotation angle = 0
  Source counts = 13.1 +/- 6.7
  Background counts = 32.2
  Rate = 0.0002 +/- 9e-05
[Fri Sep 30 20:33:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:39 2011] Source does appear to be extended
[Fri Sep 30 20:33:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:47 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 30 20:34:47 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.387
[Fri Sep 30 20:34:47 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 0.59"
[Fri Sep 30 20:34:50 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src51.ximg exists
[Fri Sep 30 20:34:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src51.csv
[Fri Sep 30 20:34:50 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src51_1.ximg exists
[Fri Sep 30 20:34:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src51.csv
[Fri Sep 30 20:34:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:51 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Fri Sep 30 20:34:51 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Sep 30 20:34:51 2011] Fit fullrun_ccd1_acisf11843_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Sep 30 20:35:32 2011] Spatial fit model total counts = 42.762600, observed total counts = 40.000000
[Fri Sep 30 20:35:32 2011] Offset between fit and detection position for source 53 = 0.079711 pixels
[Fri Sep 30 20:35:32 2011] 43.309900 total counts/ 29.527800 bgd. counts: snr = 2.536296
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.079711 pixels
  Position = (802.0, 1136.9) = 17 45 51.58 -29 0 29.2
  Extent = 0.6 (0.2-1.1)", rotation angle = 0
  Source counts = 13.8 +/- 6.6
  Background counts = 29.5
  Rate = 0.0002 +/- 8e-05
[Fri Sep 30 20:35:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:32 2011] Source does appear to be extended
[Fri Sep 30 20:35:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:39:11 2011] Not overwriting source region fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.reg
[Fri Sep 30 20:39:11 2011] Extracting stamp from image fullrun_ccd1_acisf11843_pi14-548_cl_sm2.00.img.gz, (774, 1109) - (830, 1165)
[Fri Sep 30 20:39:11 2011] Writing fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53.gif
[Fri Sep 30 20:41:39 2011] ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.evt and ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_bgd.evt exist, delete to re-create
[Fri Sep 30 20:41:39 2011] Size of ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.evt.gz[events] = 24 counts
[Fri Sep 30 20:41:39 2011] Mean chipx,y = (232.62, 1010.79)
[Fri Sep 30 20:41:39 2011] Mean tdetx,y = (4121.21, 4339.62)
[Fri Sep 30 20:41:39 2011] chipx,y range = (212.00-246.00, 999.00-1023.00)
[Fri Sep 30 20:41:39 2011] Size of ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_bgd.evt.gz[events] = 83 counts
[Fri Sep 30 20:41:39 2011] ../../acisf11843/products/images/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.img and ../../acisf11843/products/images/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_bgd.img exist, delete to re-create
[Fri Sep 30 20:41:39 2011] ../../acisf11843/products/spectra/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.pi and ../../acisf11843/products/spectra/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_bgd.pi exist, delete to re-create
[Fri Sep 30 20:41:39 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 20:41:42 2011] ../../acisf11843/products/lightcurves/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_bgd.lc exist, delete to re-create
[Fri Sep 30 20:41:58 2011] 115.917
[Fri Sep 30 20:50:17 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:17 2011] Error reading totcts from fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53_src.pi.gz
[Fri Sep 30 20:50:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:18 2011] Using photon index=1.80, rate=0.000175, arf fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src53.arf
[Fri Sep 30 20:50:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:18 2011] Updating source flux to 4.6e-15
[Fri Sep 30 20:50:51 2011] Source 53 has fewer than 100.000000 counts, skipping spectral fitting