[Fri Sep 30 20:29:55 2011] Detection parameters:
  Position = (423.1, 1056.6) = 17 46 5.78 -29 1 8.4
  Extent = 0.9" x 0.6", rotation angle = 21 degrees
  Source counts = 14.0 +/- 4.5
  Background counts = 6.0
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 20:29:56 2011] Off-axis axis estimate = 5.82'
[Fri Sep 30 20:32:43 2011] Using EEF radius (= 1.54 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:43 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Fri Sep 30 20:32:43 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.059
[Fri Sep 30 20:32:43 2011] Giving source the simple spatial ID 52 for pass 0, mean size = 1.54"
[Fri Sep 30 20:32:47 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src52.ximg exists
[Fri Sep 30 20:32:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src52.csv
[Fri Sep 30 20:32:47 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src52_1.ximg exists
[Fri Sep 30 20:32:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src52.csv
[Fri Sep 30 20:32:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11843_pi14-548_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:49 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_tfrozen_src52.ximg exists
[Fri Sep 30 20:32:49 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Sep 30 20:32:49 2011] Fit fullrun_ccd1_acisf11843_pi14-548_cl_pass0_tfrozen_src52 appears to have run properly
[Fri Sep 30 20:33:39 2011] Spatial fit model total counts = 36.910900, observed total counts = 37.000000
[Fri Sep 30 20:33:39 2011] Offset between fit and detection position for source 52 = 0.654106 pixels
[Fri Sep 30 20:33:39 2011] 36.301600 total counts/ 17.835200 bgd. counts: snr = 4.372635
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.654106 pixels
  Position = (423.6, 1056.9) = 17 46 5.78 -29 1 8.5
  Extent = 1.1 (0.6-1.7)", rotation angle = 0
  Source counts = 18.5 +/- 6.0
  Background counts = 17.8
  Rate = 0.0002 +/- 8e-05
[Fri Sep 30 20:33:39 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:39 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:39 2011] Source does appear to be extended
[Fri Sep 30 20:33:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:47 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Fri Sep 30 20:34:47 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.011
[Fri Sep 30 20:34:47 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 1.09"
[Fri Sep 30 20:34:50 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src49.ximg exists
[Fri Sep 30 20:34:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src49.csv
[Fri Sep 30 20:34:50 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src49_1.ximg exists
[Fri Sep 30 20:34:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src49.csv
[Fri Sep 30 20:34:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11843_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:51 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Fri Sep 30 20:34:51 2011] fullrun_ccd1_acisf11843_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Sep 30 20:34:51 2011] Fit fullrun_ccd1_acisf11843_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Sep 30 20:35:32 2011] Spatial fit model total counts = 31.000000, observed total counts = 31.000000
[Fri Sep 30 20:35:32 2011] Offset between fit and detection position for source 52 = 0.613172 pixels
[Fri Sep 30 20:35:32 2011] 30.591610 total counts/ 8.404910 bgd. counts: snr = 7.652902
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.613172 pixels
  Position = (424.1, 1056.5) = 17 46 5.76 -29 1 8.7
  Extent = 1.2 (0.6-2.1)", rotation angle = 0
  Source counts = 22.2 +/- 5.5
  Background counts = 8.4
  Rate = 0.0003 +/- 7e-05
[Fri Sep 30 20:35:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:32 2011] Source does appear to be extended
[Fri Sep 30 20:35:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:39:11 2011] Not overwriting source region fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.reg
[Fri Sep 30 20:39:11 2011] Extracting stamp from image fullrun_ccd1_acisf11843_pi14-548_cl_sm2.00.img.gz, (369, 1001) - (480, 1112)
[Fri Sep 30 20:39:11 2011] Writing fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52.gif
[Fri Sep 30 20:41:34 2011] ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.evt and ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Fri Sep 30 20:41:34 2011] Size of ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.evt.gz[events] = 38 counts
[Fri Sep 30 20:41:34 2011] Mean chipx,y = (613.68, 999.63)
[Fri Sep 30 20:41:34 2011] Mean tdetx,y = (4132.37, 4720.68)
[Fri Sep 30 20:41:34 2011] chipx,y range = (597.00-634.00, 979.00-1019.00)
[Fri Sep 30 20:41:34 2011] Size of ../../acisf11843/products/events/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 230 counts
[Fri Sep 30 20:41:34 2011] ../../acisf11843/products/images/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.img and ../../acisf11843/products/images/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Fri Sep 30 20:41:34 2011] ../../acisf11843/products/spectra/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.pi and ../../acisf11843/products/spectra/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Fri Sep 30 20:41:34 2011] Not generating rmf since there are only 22 counts
[Fri Sep 30 20:41:36 2011] ../../acisf11843/products/lightcurves/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Fri Sep 30 20:41:58 2011] 185.562
[Fri Sep 30 20:50:17 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:17 2011] Error reading totcts from fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52_src.pi.gz
[Fri Sep 30 20:50:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:18 2011] Using photon index=1.80, rate=0.000281, arf fullrun_ccd1_acisf11843_pi14-548_pass1_cl_src52.arf
[Fri Sep 30 20:50:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:18 2011] Updating source flux to 4.6e-15
[Fri Sep 30 20:50:51 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting