[Fri Sep 30 20:29:49 2011] Detection parameters:
  Position = (708.6, 309.3) = 17 46 1.06 -28 58 54.2
  Extent = 0.5" x 0.5", rotation angle = 30 degrees
  Source counts = 34.2 +/- 6.4
  Background counts = 6.8
  Rate = 0.0004 +/- 8e-05

[Fri Sep 30 20:29:52 2011] Off-axis axis estimate = 4.80'
[Fri Sep 30 20:32:36 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 20:32:36 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Fri Sep 30 20:32:36 2011] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.833
[Fri Sep 30 20:32:36 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.10"
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 20:32:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 30 20:32:40 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 30 20:33:30 2011] Spatial fit model total counts = 91.011400, observed total counts = 86.000000
[Fri Sep 30 20:33:30 2011] Offset between fit and detection position for source 6 = 2.004583 pixels
[Fri Sep 30 20:33:30 2011] 90.470900 total counts/ 22.027200 bgd. counts: snr = 14.583234
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.004583 pixels
  Position = (710.5, 309.7) = 17 46 1.01 -28 58 54.3
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 68.4 +/- 9.5
  Background counts = 22.0
  Rate = 0.0009 +/- 0.0001
[Fri Sep 30 20:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:30 2011] Source does appear to be extended
[Fri Sep 30 20:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 20:34:43 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Fri Sep 30 20:34:43 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830
[Fri Sep 30 20:34:43 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.96"
[Fri Sep 30 20:34:45 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src5.ximg exists
[Fri Sep 30 20:34:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 20:34:45 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Sep 30 20:34:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 20:34:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 30 20:34:46 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 30 20:35:25 2011] Spatial fit model total counts = 102.774000, observed total counts = 97.000000
[Fri Sep 30 20:35:25 2011] Offset between fit and detection position for source 6 = 0.100783 pixels
[Fri Sep 30 20:35:25 2011] 103.466300 total counts/ 40.540700 bgd. counts: snr = 9.882840
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.100783 pixels
  Position = (710.6, 309.6) = 17 46 1.01 -28 58 54.3
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 62.9 +/- 10.2
  Background counts = 40.5
  Rate = 0.0008 +/- 0.0001
[Fri Sep 30 20:35:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:25 2011] Source does appear to be extended
[Fri Sep 30 20:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:36:27 2011] Not overwriting source region fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 30 20:36:27 2011] Extracting stamp from image fullrun_ccd0_acisf11843_pi14-548_cl_sm2.00.img.gz, (668, 267) - (753, 352)
[Fri Sep 30 20:36:27 2011] Writing fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6.gif
[Fri Sep 30 20:36:44 2011] ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.evt and ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 30 20:36:44 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.evt.gz[events] = 85 counts
[Fri Sep 30 20:36:44 2011] Mean chipx,y = (578.75, 820.33)
[Fri Sep 30 20:36:44 2011] Mean tdetx,y = (3881.33, 4553.25)
[Fri Sep 30 20:36:44 2011] chipx,y range = (559.00-602.00, 798.00-840.00)
[Fri Sep 30 20:36:44 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 232 counts
[Fri Sep 30 20:36:44 2011] ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.img and ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 30 20:36:44 2011] ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.pi and ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 30 20:36:44 2011] Not generating rmf since there are only 62 counts
[Fri Sep 30 20:36:47 2011] ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 30 20:39:08 2011] 185.171
[Fri Sep 30 20:50:15 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:15 2011] Error reading totcts from fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 30 20:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:16 2011] Using photon index=1.80, rate=0.000797, arf fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 20:50:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:16 2011] Updating source flux to 1.3e-14
[Fri Sep 30 20:50:28 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting