[Fri Sep 30 20:29:49 2011] Detection parameters:
  Position = (1151.4, 227.1) = 17 45 44.46 -28 59 34.8
  Extent = 0.9" x 0.7", rotation angle = 106 degrees
  Source counts = 120.1 +/- 14.4
  Background counts = 86.9
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 20:29:52 2011] Off-axis axis estimate = 1.12'
[Fri Sep 30 20:32:36 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:36 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Sep 30 20:32:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Fri Sep 30 20:32:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 20:32:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 20:32:40 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 20:33:30 2011] Spatial fit model total counts = 280.646000, observed total counts = 269.000000
[Fri Sep 30 20:33:30 2011] Offset between fit and detection position for source 3 = 0.607050 pixels
[Fri Sep 30 20:33:30 2011] 283.856600 total counts/ 200.034000 bgd. counts: snr = 5.926649
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.607050 pixels
  Position = (1151.7, 226.6) = 17 45 44.47 -28 59 35.3
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 83.8 +/- 16.8
  Background counts = 200.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 20:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:30 2011] Source does appear to be extended
[Fri Sep 30 20:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:43 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Sep 30 20:34:43 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.112
[Fri Sep 30 20:34:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.80"
[Fri Sep 30 20:34:44 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 20:34:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 20:34:45 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 20:34:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 20:34:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 20:34:46 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 20:35:25 2011] Spatial fit model total counts = 280.686000, observed total counts = 270.000000
[Fri Sep 30 20:35:25 2011] Offset between fit and detection position for source 3 = 0.048544 pixels
[Fri Sep 30 20:35:25 2011] 286.387800 total counts/ 204.067000 bgd. counts: snr = 5.762663
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.048544 pixels
  Position = (1151.7, 226.6) = 17 45 44.47 -28 59 35.3
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 82.3 +/- 16.9
  Background counts = 204.1
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 20:35:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:25 2011] Source does appear to be extended
[Fri Sep 30 20:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:36:27 2011] Not overwriting source region fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 20:36:27 2011] Extracting stamp from image fullrun_ccd0_acisf11843_pi14-548_cl_sm2.00.img.gz, (1115, 190) - (1188, 263)
[Fri Sep 30 20:36:27 2011] Writing fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 20:36:35 2011] ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.evt and ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 30 20:36:35 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.evt.gz[events] = 203 counts
[Fri Sep 30 20:36:35 2011] Mean chipx,y = (997.68, 974.53)
[Fri Sep 30 20:36:35 2011] Mean tdetx,y = (4035.53, 4134.32)
[Fri Sep 30 20:36:35 2011] chipx,y range = (981.00-1023.00, 951.00-995.00)
[Fri Sep 30 20:36:35 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 744 counts
[Fri Sep 30 20:36:35 2011] ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.img and ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 30 20:36:35 2011] ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.pi and ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 30 20:36:35 2011] Not generating rmf since there are only 82 counts
[Fri Sep 30 20:36:38 2011] ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 30 20:39:08 2011] 169.253
[Fri Sep 30 20:50:15 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:15 2011] Error reading totcts from fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 30 20:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:16 2011] Using photon index=1.80, rate=0.00104, arf fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 20:50:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:16 2011] Updating source flux to 1.9e-14
[Fri Sep 30 20:50:28 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting