[Fri Sep 30 20:29:50 2011] Detection parameters:
  Position = (945.8, 386.5) = 17 45 52.17 -28 58 16.3
  Extent = 0.7" x 0.5", rotation angle = 162 degrees
  Source counts = 30.2 +/- 6.7
  Background counts = 14.8
  Rate = 0.0004 +/- 8e-05

[Fri Sep 30 20:29:52 2011] Off-axis axis estimate = 3.22'
[Fri Sep 30 20:32:36 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:36 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Sep 30 20:32:36 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.953
[Fri Sep 30 20:32:36 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.63"
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src25.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src25.csv
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src25.csv
[Fri Sep 30 20:32:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Sep 30 20:32:40 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Sep 30 20:33:30 2011] Spatial fit model total counts = 63.999400, observed total counts = 64.000000
[Fri Sep 30 20:33:30 2011] Offset between fit and detection position for source 26 = 0.746301 pixels
[Fri Sep 30 20:33:30 2011] 63.204500 total counts/ 36.971000 bgd. counts: snr = 4.314452
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.746301 pixels
  Position = (946.3, 387.1) = 17 45 52.17 -28 58 16.3
  Extent = 0.9 (0.5-1.3)", rotation angle = 0
  Source counts = 26.2 +/- 8.0
  Background counts = 37.0
  Rate = 0.0003 +/- 0.0001
[Fri Sep 30 20:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:30 2011] Source does appear to be extended
[Fri Sep 30 20:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:43 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Sep 30 20:34:43 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Fri Sep 30 20:34:43 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.93"
[Fri Sep 30 20:34:45 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src25.ximg exists
[Fri Sep 30 20:34:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src25.csv
[Fri Sep 30 20:34:45 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Sep 30 20:34:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src25.csv
[Fri Sep 30 20:34:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Sep 30 20:34:46 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Sep 30 20:35:25 2011] Spatial fit model total counts = 62.999200, observed total counts = 63.000000
[Fri Sep 30 20:35:25 2011] Offset between fit and detection position for source 26 = 0.008246 pixels
[Fri Sep 30 20:35:25 2011] 62.136400 total counts/ 36.486900 bgd. counts: snr = 4.246298
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.008246 pixels
  Position = (946.3, 387.1) = 17 45 52.17 -28 58 16.3
  Extent = 0.9 (0.5-1.3)", rotation angle = 0
  Source counts = 25.6 +/- 7.9
  Background counts = 36.5
  Rate = 0.0003 +/- 0.0001
[Fri Sep 30 20:35:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:25 2011] Source does appear to be extended
[Fri Sep 30 20:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:36:27 2011] Not overwriting source region fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.reg
[Fri Sep 30 20:36:27 2011] Extracting stamp from image fullrun_ccd0_acisf11843_pi14-548_cl_sm2.00.img.gz, (905, 345) - (988, 429)
[Fri Sep 30 20:36:27 2011] Writing fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26.gif
[Fri Sep 30 20:37:42 2011] ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.evt and ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Sep 30 20:37:42 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.evt.gz[events] = 49 counts
[Fri Sep 30 20:37:42 2011] Mean chipx,y = (824.71, 782.61)
[Fri Sep 30 20:37:42 2011] Mean tdetx,y = (3843.61, 4307.29)
[Fri Sep 30 20:37:42 2011] chipx,y range = (807.00-845.00, 763.00-800.00)
[Fri Sep 30 20:37:42 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 267 counts
[Fri Sep 30 20:37:42 2011] ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.img and ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Sep 30 20:37:42 2011] ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.pi and ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Sep 30 20:37:42 2011] Not generating rmf since there are only 25 counts
[Fri Sep 30 20:37:44 2011] ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Sep 30 20:39:09 2011] 195.771
[Fri Sep 30 20:50:16 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:16 2011] Error reading totcts from fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Sep 30 20:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:16 2011] Using photon index=1.80, rate=0.000325, arf fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src26.arf
[Fri Sep 30 20:50:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:16 2011] Updating source flux to 5.1e-15
[Fri Sep 30 20:50:28 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting