[Fri Sep 30 20:29:49 2011] Detection parameters:
  Position = (1122.8, 361.4) = 17 45 45.53 -28 58 28.7
  Extent = 0.6" x 0.5", rotation angle = 7 degrees
  Source counts = 305.8 +/- 18.7
  Background counts = 44.2
  Rate = 0.004 +/- 0.0002

[Fri Sep 30 20:29:52 2011] Off-axis axis estimate = 1.98'
[Fri Sep 30 20:32:36 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:32:36 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Sep 30 20:32:36 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.200
[Fri Sep 30 20:32:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43"
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 20:32:37 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 20:32:37 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 20:32:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 20:32:40 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 20:32:40 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 20:33:30 2011] Spatial fit model total counts = 449.000000, observed total counts = 449.000000
[Fri Sep 30 20:33:30 2011] Offset between fit and detection position for source 1 = 0.756225 pixels
[Fri Sep 30 20:33:30 2011] 385.153000 total counts/ 128.432000 bgd. counts: snr = 22.652950
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.756225 pixels
  Position = (1123.4, 361.8) = 17 45 45.53 -28 58 28.7
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 256.7 +/- 19.6
  Background counts = 128.4
  Rate = 0.003 +/- 0.0002
[Fri Sep 30 20:33:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:33:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:33:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:33:30 2011] Source does appear to be extended
[Fri Sep 30 20:33:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:33:30 2011] Source is confused with source 8
[Fri Sep 30 20:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 20:34:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 20:34:43 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Fri Sep 30 20:34:43 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.099
[Fri Sep 30 20:34:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.80"
[Fri Sep 30 20:34:44 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 20:34:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 20:34:44 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 20:34:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 20:34:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11843_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 20:34:46 2011] fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 20:34:46 2011] Fit fullrun_ccd0_acisf11843_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 20:35:25 2011] Warning, spatial fit 1 centroid is now closest to src. 8
[Fri Sep 30 20:35:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 20:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 20:35:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 20:35:25 2011] Source does appear to be extended
[Fri Sep 30 20:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:36:27 2011] Not overwriting source region fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 20:36:27 2011] Extracting stamp from image fullrun_ccd0_acisf11843_pi14-548_cl_sm2.00.img.gz, (1087, 325) - (1160, 399)
[Fri Sep 30 20:36:27 2011] Writing fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 20:36:30 2011] ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.evt and ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 20:36:30 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.evt.gz[events] = 377 counts
[Fri Sep 30 20:36:30 2011] Mean chipx,y = (992.23, 835.83)
[Fri Sep 30 20:36:30 2011] Mean tdetx,y = (3896.83, 4139.77)
[Fri Sep 30 20:36:30 2011] chipx,y range = (975.00-1019.00, 816.00-857.00)
[Fri Sep 30 20:36:30 2011] Size of ../../acisf11843/products/events/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 321 counts
[Fri Sep 30 20:36:30 2011] ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.img and ../../acisf11843/products/images/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 20:36:30 2011] ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.pi and ../../acisf11843/products/spectra/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 20:36:32 2011] ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.lc and ../../acisf11843/products/lightcurves/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 20:39:08 2011] Keeping rmf generated by specextract
[Fri Sep 30 20:39:08 2011] 174.81
[Fri Sep 30 20:50:15 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:50:15 2011] Error reading totcts from fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 20:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:16 2011] Using photon index=1.80, rate=0.00325, arf fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 20:50:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:16 2011] Updating source flux to 5.7e-14
[Fri Sep 30 20:50:28 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Sep 30 20:50:51 2011] Reading fit data from acisf11843/analysis//spectral/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 20:50:51 2011] Spectral fit parameter nH value = 1.93165e+23
[Fri Sep 30 20:50:51 2011] Spectral fit parameter PhoIndex value = 2.32628
[Fri Sep 30 20:50:51 2011] Failed to get F(0.3-8.0) from acisf11843/analysis//spectral/fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 20:50:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:50:51 2011] Using Nh = 1.9e+23, photon index=2.33, rate=0.00325, arf fullrun_ccd0_acisf11843_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 20:50:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:50:51 2011] Updating source flux to 1.2e-13