[Mon Jan 23 14:42:16 2012] Detection parameters:
  Position = (666.9, 1205.2) = 0 42 44.67 41 16 18.2
  Extent = 0.5" x 0.5", rotation angle = 137 degrees
  Source counts = 14.3 +/- 4.0
  Background counts = 1.7
  Rate = 0.004 +/- 0.001

[Mon Jan 23 14:42:17 2012] Off-axis axis estimate = 0.49'
[Mon Jan 23 15:33:43 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:33:43 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 15:33:43 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.593
[Mon Jan 23 15:33:43 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.39"
[Mon Jan 23 16:04:33 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src23.ximg exists
[Mon Jan 23 16:04:33 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src23.csv
[Mon Jan 23 16:04:33 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src23_1.ximg exists
[Mon Jan 23 16:04:33 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src23.csv
[Mon Jan 23 16:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:04:34 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Mon Jan 23 16:04:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src23.csv
[Mon Jan 23 16:04:34 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jan 23 16:04:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src23.csv
[Mon Jan 23 16:04:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:17:46 2012] Source 25 is offset by 2.375224 and -2.313339 pixels which is larger than
2 X fitted extent = 0.399159 x 0.399159, not incorporating fit results
[Mon Jan 23 17:17:46 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:46 2012] Assessing source extent using major
[Mon Jan 23 17:17:46 2012] Source does appear to be extended
[Mon Jan 23 17:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Mon Jan 23 17:53:28 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:53:28 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 17:53:28 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.593
[Mon Jan 23 17:53:28 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.39"
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src12.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src12.csv
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src12_1.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src12.csv
[Mon Jan 23 18:11:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src12.csv
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src12.csv
[Mon Jan 23 18:11:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:09:01 2012] Source 25 is offset by 3.068252 and 1.908049 pixels which is larger than
2 X fitted extent = 0.399159 x 0.399159, not incorporating fit results
[Mon Jan 23 19:09:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:09:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:09:01 2012] Assessing source extent using major
[Mon Jan 23 19:09:01 2012] Source does appear to be extended
[Mon Jan 23 19:09:01 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Mon Jan 23 19:18:45 2012] Writing source region out to fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src25_src.reg
[Mon Jan 23 19:18:45 2012] Extracting stamp from image fullrun_ccd3_acisf11841_pi14-548_cl_sm2.00.img.gz, (642, 1180) - (692, 1230)
[Mon Jan 23 19:18:45 2012] Writing fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src25.gif
[Mon Jan 23 19:23:33 2012] ../../acisf11841/products/events/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src25_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 19:24:51 2012] No arf file found
[Mon Jan 23 19:27:17 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:17 2012] Error reading totcts from fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src25_src.pi
[Mon Jan 23 19:27:17 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:27:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:27:23 2012] acisf11841/analysis//spectral/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete