[Mon Jan 23 14:42:16 2012] Detection parameters:
  Position = (774.5, 1142.9) = 0 42 39.97 41 15 47.5
  Extent = 0.5" x 0.5", rotation angle = 88 degrees
  Source counts = 58.0 +/- 7.7
  Background counts = 1.0
  Rate = 0.01 +/- 0.002

[Mon Jan 23 14:42:17 2012] Off-axis axis estimate = 0.67'
[Mon Jan 23 15:33:43 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:33:43 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 15:33:43 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.911
[Mon Jan 23 15:33:43 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.39"
[Mon Jan 23 16:04:33 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src15.ximg exists
[Mon Jan 23 16:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src15.csv
[Mon Jan 23 16:04:33 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Jan 23 16:04:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src15.csv
[Mon Jan 23 16:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:04:34 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Jan 23 16:04:34 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jan 23 16:04:34 2012] Fit fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Jan 23 17:17:46 2012] Source 16 is offset by 3.507434 and 1.880451 pixels which is larger than
2 X fitted extent = 0.391561 x 0.391561, not incorporating fit results
[Mon Jan 23 17:17:46 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:46 2012] Assessing source extent using major
[Mon Jan 23 17:17:46 2012] Source does appear to be extended
[Mon Jan 23 17:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:53:28 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:53:28 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Jan 23 17:53:28 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.911
[Mon Jan 23 17:53:28 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.39"
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src7.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src7.csv
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src7_1.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src7.csv
[Mon Jan 23 18:11:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src7.csv
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jan 23 18:11:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src7.csv
[Mon Jan 23 18:11:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:09:01 2012] Spatial fit model total counts = 1.886440, observed total counts = 2.000000
[Mon Jan 23 19:09:01 2012] Offset between fit and detection position for source 16 = 1.734562 pixels
[Mon Jan 23 19:09:01 2012] 1.884810 total counts/ 0.000000 bgd. counts: snr = 2185363704.941766
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.734562 pixels
  Position = (773.6, 1144.3) = 0 42 40.04 41 15 48.0
  Extent = 1.0 (0.5-1.5)", rotation angle = 0
  Source counts = 1.9 +/- 1.4
  Background counts = 0.0
  Rate = 0.01 +/- 0.009
[Mon Jan 23 19:09:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:09:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:09:01 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 19:09:01 2012] Source does appear to be extended
[Mon Jan 23 19:09:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 19:18:45 2012] Writing source region out to fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16_src.reg
[Mon Jan 23 19:18:45 2012] Extracting stamp from image fullrun_ccd3_acisf11841_pi14-548_cl_sm2.00.img.gz, (727, 1098) - (820, 1191)
[Mon Jan 23 19:18:45 2012] Writing fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16.gif
[Mon Jan 23 19:20:08 2012] Size of ../../acisf11841/products/events/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16_src.evt.gz[events] = 2 counts
[Mon Jan 23 19:20:08 2012] Mean chipx,y = (875.50, 1001.00)
[Mon Jan 23 19:20:08 2012] Mean tdetx,y = (4131.00, 3936.50)
[Mon Jan 23 19:20:08 2012] chipx,y range = (865.00-886.00, 999.00-1003.00)
[Mon Jan 23 19:20:08 2012] Size of ../../acisf11841/products/events/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 1 counts
[Mon Jan 23 19:20:09 2012] Not generating rmf since there are only 1 counts
[Mon Jan 23 19:20:09 2012] arf not found, will run specextract
[Mon Jan 23 19:20:39 2012] ../../acisf11841/products/spectra/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16.warf not found
[Mon Jan 23 19:20:39 2012] ../../acisf11841/products/spectra/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16.wrmf not found
[Mon Jan 23 19:20:39 2012] Removal of ../../acisf11841/products/spectra/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16.soff failed
[Mon Jan 23 19:24:51 2012] Spectrum 16 has only 2 counts, deleting rmf
[Mon Jan 23 19:24:51 2012] 157.033
[Mon Jan 23 19:27:17 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:17 2012] Error reading totcts from fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16_src.pi.gz
[Mon Jan 23 19:27:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 19:27:17 2012] Using photon index=1.80, rate=0.0129, arf fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16.arf
[Mon Jan 23 19:27:17 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 19:27:17 2012] Updating source flux to 1.8e-13
[Mon Jan 23 19:27:22 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Mon Jan 23 19:27:22 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 19:27:23 2012] acisf11841/analysis//spectral/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete