[Mon Jan 23 14:42:16 2012] Detection parameters:
  Position = (657.8, 1093.3) = 0 42 45.06 41 15 23.2
  Extent = 0.5" x 0.5", rotation angle = 28 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 14:42:17 2012] Off-axis axis estimate = 1.11'
[Mon Jan 23 15:33:43 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:33:43 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Jan 23 15:33:43 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Mon Jan 23 15:33:43 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 0.38"
[Mon Jan 23 16:04:33 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src26.ximg exists
[Mon Jan 23 16:04:33 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src26.csv
[Mon Jan 23 16:04:33 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src26_1.ximg exists
[Mon Jan 23 16:04:33 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src26.csv
[Mon Jan 23 16:04:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 16:04:34 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Mon Jan 23 16:04:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src26.csv
[Mon Jan 23 16:04:34 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jan 23 16:04:34 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src26.csv
[Mon Jan 23 16:04:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11841_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:17:46 2012] Source 11 is offset by -0.164630 and -1.665929 pixels which is larger than
2 X fitted extent = 0.478016 x 0.478016, not incorporating fit results
[Mon Jan 23 17:17:46 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:46 2012] Assessing source extent using major
[Mon Jan 23 17:17:46 2012] Source does appear to be extended
[Mon Jan 23 17:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:53:28 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:53:28 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Jan 23 17:53:28 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Mon Jan 23 17:53:28 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 0.38"
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src15.ximg exists
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Jan 23 18:11:56 2012] Fit fullrun_ccd3_acisf11841_pi14-548_cl_pass1_src15 appears to have run properly
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Jan 23 18:11:56 2012] fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jan 23 18:11:56 2012] Fit fullrun_ccd3_acisf11841_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Jan 23 19:09:01 2012] Source 11 is offset by -0.166748 and -1.606789 pixels which is larger than
2 X fitted extent = 0.386817 x 0.386817, not incorporating fit results
[Mon Jan 23 19:09:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:09:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:09:01 2012] Assessing source extent using major
[Mon Jan 23 19:09:01 2012] Source does appear to be extended
[Mon Jan 23 19:09:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 19:18:45 2012] Writing source region out to fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src11_src.reg
[Mon Jan 23 19:18:45 2012] Extracting stamp from image fullrun_ccd3_acisf11841_pi14-548_cl_sm2.00.img.gz, (635, 1071) - (680, 1116)
[Mon Jan 23 19:18:45 2012] Writing fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src11.gif
[Mon Jan 23 19:23:43 2012] Size of ../../acisf11841/products/events/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src11_src.evt.gz[events] = 1 counts
[Mon Jan 23 19:23:43 2012] Mean chipx,y = (908.00, 879.00)
[Mon Jan 23 19:23:43 2012] Mean tdetx,y = (4253.00, 3969.00)
[Mon Jan 23 19:23:43 2012] chipx,y range = (908.00-908.00, 879.00-879.00)
[Mon Jan 23 19:23:43 2012] ../../acisf11841/products/events/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src11_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Mon Jan 23 19:24:51 2012] No arf file found
[Mon Jan 23 19:27:17 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:17 2012] Error reading totcts from fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src11_src.pi
[Mon Jan 23 19:27:17 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:27:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:27:23 2012] acisf11841/analysis//spectral/fullrun_ccd3_acisf11841_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete