[Mon Jan 23 14:42:13 2012] Detection parameters:
  Position = (653.3, 822.4) = 0 42 13.12 41 18 36.3
  Extent = 1.0" x 0.7", rotation angle = 68 degrees
  Source counts = 239.2 +/- 15.6
  Background counts = 3.8
  Rate = 0.06 +/- 0.004

[Mon Jan 23 14:42:14 2012] Off-axis axis estimate = 5.89'
[Mon Jan 23 15:13:37 2012] Using EEF radius (= 1.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:13:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 15:13:37 2012] Initial guess for spatial extent in simple fitting = 1.57"
[Mon Jan 23 15:13:37 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.896
[Mon Jan 23 15:13:37 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 1.57"
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src4.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src4.csv
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src4_1.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src4.csv
[Mon Jan 23 15:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src4.csv
[Mon Jan 23 15:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:17:43 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.433303 pixels away
[Mon Jan 23 17:17:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:43 2012] Assessing source extent using major
[Mon Jan 23 17:17:43 2012] Source does appear to be extended
[Mon Jan 23 17:17:43 2012] Computing asymmetry using major and minor axis, asym = 1.37
[Mon Jan 23 17:36:23 2012] Using EEF radius (= 1.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:36:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 17:36:23 2012] Initial guess for spatial extent in simple fitting = 1.57"
[Mon Jan 23 17:36:23 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.896
[Mon Jan 23 17:36:23 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 1.57"
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src4.ximg exists
[Mon Jan 23 17:53:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src4.csv
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Jan 23 17:53:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src4.csv
[Mon Jan 23 17:53:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jan 23 17:53:28 2012] Fit fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Jan 23 19:08:59 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.433303 pixels away
[Mon Jan 23 19:08:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:08:59 2012] Assessing source extent using major
[Mon Jan 23 19:08:59 2012] Source does appear to be extended
[Mon Jan 23 19:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.37
[Mon Jan 23 19:12:49 2012] Writing source region out to fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3_src.reg
[Mon Jan 23 19:12:49 2012] Extracting stamp from image fullrun_ccd2_acisf11841_pi14-548_cl_sm2.00.img.gz, (610, 779) - (697, 866)
[Mon Jan 23 19:12:49 2012] Writing fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3.gif
[Mon Jan 23 19:13:02 2012] Size of ../../acisf11841/products/events/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3_src.evt.gz[events] = 3 counts
[Mon Jan 23 19:13:02 2012] Mean chipx,y = (307.67, 377.67)
[Mon Jan 23 19:13:02 2012] Mean tdetx,y = (3438.67, 3778.33)
[Mon Jan 23 19:13:02 2012] chipx,y range = (299.00-314.00, 361.00-387.00)
[Mon Jan 23 19:13:02 2012] Size of ../../acisf11841/products/events/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1 counts
[Mon Jan 23 19:13:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan 23 19:13:03 2012] arf not found, will run specextract
[Mon Jan 23 19:13:27 2012] ../../acisf11841/products/spectra/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3.warf not found
[Mon Jan 23 19:13:27 2012] ../../acisf11841/products/spectra/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3.wrmf not found
[Mon Jan 23 19:13:27 2012] Removal of ../../acisf11841/products/spectra/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3.soff failed
[Mon Jan 23 19:18:44 2012] Keeping rmf generated by specextract
[Mon Jan 23 19:18:44 2012] 181.342
[Mon Jan 23 19:27:16 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:16 2012] Error reading totcts from fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Jan 23 19:27:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 23 19:27:16 2012] Using photon index=1.80, rate=0.0602, arf fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3.arf
[Mon Jan 23 19:27:16 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 23 19:27:16 2012] Updating source flux to 7.4e-13
[Mon Jan 23 19:27:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:27:22 2012] acisf11841/analysis//spectral/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete