[Mon Jan 23 14:42:14 2012] Detection parameters:
  Position = (599.3, 1056.1) = 0 42 15.47 41 20 31.3
  Extent = 1.7" x 1.3", rotation angle = 88 degrees
  Source counts = 13.2 +/- 3.7
  Background counts = 0.8
  Rate = 0.003 +/- 0.0009

[Mon Jan 23 14:42:14 2012] Off-axis axis estimate = 6.51'
[Mon Jan 23 15:13:37 2012] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:13:37 2012] Initial guess for spatial extent in simple fitting = 1.90"
[Mon Jan 23 15:13:37 2012] source mask rpix=3.9, npix_max = 75, mask sum = 72, frac = 0.948
[Mon Jan 23 15:13:37 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 1.90"
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src19.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: total counts is not > 0
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: total counts is not > 0
[Mon Jan 23 15:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: total counts is not > 0
[Mon Jan 23 15:33:43 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jan 23 15:33:43 2012] Warning: total counts is not > 0
[Mon Jan 23 15:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:17:43 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 21.013573 pixels away
[Mon Jan 23 17:17:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:43 2012] Assessing source extent using major
[Mon Jan 23 17:17:43 2012] Source does appear to be extended
[Mon Jan 23 17:17:43 2012] Computing asymmetry using major and minor axis, asym = 1.28
[Mon Jan 23 17:36:23 2012] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:36:23 2012] Initial guess for spatial extent in simple fitting = 1.90"
[Mon Jan 23 17:36:23 2012] source mask rpix=3.9, npix_max = 75, mask sum = 72, frac = 0.948
[Mon Jan 23 17:36:23 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 1.90"
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src16.ximg exists
[Mon Jan 23 17:53:28 2012] Warning: total counts is not > 0
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src16_1.ximg exists
[Mon Jan 23 17:53:28 2012] Warning: total counts is not > 0
[Mon Jan 23 17:53:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Mon Jan 23 17:53:28 2012] Warning: total counts is not > 0
[Mon Jan 23 17:53:28 2012] fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Jan 23 17:53:28 2012] Warning: total counts is not > 0
[Mon Jan 23 17:53:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11841_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:08:59 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 20.962316 pixels away
[Mon Jan 23 19:08:59 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:08:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:08:59 2012] Assessing source extent using major
[Mon Jan 23 19:08:59 2012] Source does appear to be extended
[Mon Jan 23 19:08:59 2012] Computing asymmetry using major and minor axis, asym = 1.28
[Mon Jan 23 19:12:49 2012] Writing source region out to fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src25_src.reg
[Mon Jan 23 19:12:49 2012] Extracting stamp from image fullrun_ccd2_acisf11841_pi14-548_cl_sm2.00.img.gz, (523, 980) - (675, 1132)
[Mon Jan 23 19:12:49 2012] Writing fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src25.gif
[Mon Jan 23 19:17:01 2012] ../../acisf11841/products/events/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src25_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 19:18:45 2012] No arf file found
[Mon Jan 23 19:27:16 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:16 2012] Error reading totcts from fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src25_src.pi
[Mon Jan 23 19:27:16 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:27:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:27:22 2012] acisf11841/analysis//spectral/fullrun_ccd2_acisf11841_pi14-548_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete