[Mon Jan 23 14:42:12 2012] Detection parameters:
  Position = (777.9, 499.3) = 0 43 4.18 41 16 0.9
  Extent = 0.6" x 0.5", rotation angle = 5 degrees
  Source counts = 14.8 +/- 3.9
  Background counts = 0.2
  Rate = 0.004 +/- 0.001

[Mon Jan 23 14:42:12 2012] Off-axis axis estimate = 4.17'
[Mon Jan 23 14:57:55 2012] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 14:57:55 2012] Initial guess for spatial extent in simple fitting = 0.88"
[Mon Jan 23 14:57:55 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950
[Mon Jan 23 14:57:55 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.88"
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src12.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: total counts is not > 0
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src12_1.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: total counts is not > 0
[Mon Jan 23 15:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: total counts is not > 0
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: total counts is not > 0
[Mon Jan 23 15:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:17:40 2012] Source 5 is offset by 6.854313 and 0.135935 pixels which is larger than
2 X fitted extent = 0.897098 x 0.897098, not incorporating fit results
[Mon Jan 23 17:17:40 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:40 2012] Assessing source extent using major
[Mon Jan 23 17:17:40 2012] Source does appear to be extended
[Mon Jan 23 17:17:40 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Mon Jan 23 17:26:36 2012] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:26:36 2012] Initial guess for spatial extent in simple fitting = 0.88"
[Mon Jan 23 17:26:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950
[Mon Jan 23 17:26:36 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 0.88"
[Mon Jan 23 17:36:23 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass1_src8.ximg exists
[Mon Jan 23 17:36:23 2012] Warning: total counts is not > 0
[Mon Jan 23 17:36:23 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Jan 23 17:36:23 2012] Warning: total counts is not > 0
[Mon Jan 23 17:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11841_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11841_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:36:23 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Jan 23 17:36:23 2012] Warning: total counts is not > 0
[Mon Jan 23 17:36:23 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jan 23 17:36:23 2012] Warning: total counts is not > 0
[Mon Jan 23 17:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11841_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11841_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 19:08:57 2012] Source 5 is offset by 5.590695 and 3.160801 pixels which is larger than
2 X fitted extent = 0.897098 x 0.897098, not incorporating fit results
[Mon Jan 23 19:08:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:08:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:08:57 2012] Assessing source extent using major
[Mon Jan 23 19:08:57 2012] Source does appear to be extended
[Mon Jan 23 19:08:57 2012] Computing asymmetry using major and minor axis, asym = 1.13
[Mon Jan 23 19:11:12 2012] Writing source region out to fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src5_src.reg
[Mon Jan 23 19:11:12 2012] Extracting stamp from image fullrun_ccd1_acisf11841_pi14-548_cl_sm2.00.img.gz, (753, 474) - (803, 525)
[Mon Jan 23 19:11:12 2012] Writing fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src5.gif
[Mon Jan 23 19:12:16 2012] ../../acisf11841/products/events/fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src5_src.evt.gz[events] does not have any counts, not extracting products.
[Mon Jan 23 19:12:49 2012] No arf file found
[Mon Jan 23 19:27:16 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:16 2012] Error reading totcts from fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src5_src.pi
[Mon Jan 23 19:27:16 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:27:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jan 23 19:27:21 2012] acisf11841/analysis//spectral/fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete