[Mon Jan 23 14:42:11 2012] Detection parameters:
  Position = (806.6, 421.5) = 0 43 2.92 41 15 22.7
  Extent = 0.7" x 0.5", rotation angle = 145 degrees
  Source counts = 55.5 +/- 7.5
  Background counts = 0.5
  Rate = 0.01 +/- 0.002

[Mon Jan 23 14:42:12 2012] Off-axis axis estimate = 4.04'
[Mon Jan 23 14:57:55 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 14:57:55 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Mon Jan 23 14:57:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.278
[Mon Jan 23 14:57:55 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.84"
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src6.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src6.csv
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src6.csv
[Mon Jan 23 15:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11841_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon Jan 23 15:13:37 2012] fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jan 23 15:13:37 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon Jan 23 15:13:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11841_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:17:40 2012] Spatial fit model total counts = 0.799916, observed total counts = 1.000000
[Mon Jan 23 17:17:40 2012] Offset between fit and detection position for source 1 = 0.641041 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.641041 pixels
  Position = (807.0, 422.0) = 0 43 2.92 41 15 22.6
  Extent = 0.2" x 0.2", rotation angle = 0
  Source counts = 0.8 +/- 0.9
  Background counts = 0.0
  Rate = 0.005 +/- 0.006
[Mon Jan 23 17:17:40 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:17:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:17:40 2012] Assessing source extent using major
[Mon Jan 23 17:17:40 2012] Source does appear to be extended
[Mon Jan 23 17:17:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:26:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:26:36 2012] Initial guess for spatial extent in simple fitting = 0.21"
[Mon Jan 23 17:26:36 2012] Spatial fitting skipped for pass 1: source                                 has 0.8 net counts, is at off-axis angle 4.0'
[Mon Jan 23 19:08:57 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 19:08:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 19:08:57 2012] Assessing source extent using major
[Mon Jan 23 19:08:57 2012] Source does appear to be extended
[Mon Jan 23 19:08:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 19:11:12 2012] Writing source region out to fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src1_src.reg
[Mon Jan 23 19:11:12 2012] Extracting stamp from image fullrun_ccd1_acisf11841_pi14-548_cl_sm2.00.img.gz, (797, 412) - (817, 432)
[Mon Jan 23 19:11:12 2012] Writing fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src1.gif
[Mon Jan 23 19:11:31 2012] Size of ../../acisf11841/products/events/fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1 counts
[Mon Jan 23 19:11:31 2012] Mean chipx,y = (146.00, 573.00)
[Mon Jan 23 19:11:31 2012] Mean tdetx,y = (4559.00, 4253.00)
[Mon Jan 23 19:11:31 2012] chipx,y range = (146.00-146.00, 573.00-573.00)
[Mon Jan 23 19:11:31 2012] ../../acisf11841/products/events/fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src1_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Mon Jan 23 19:12:49 2012] No arf file found
[Mon Jan 23 19:27:16 2012] Updating aperture counts using extracted products
[Mon Jan 23 19:27:16 2012] Error reading totcts from fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src1_src.pi
[Mon Jan 23 19:27:16 2012] No arf file for this source, not re-computing flux
[Mon Jan 23 19:27:20 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 23 19:27:21 2012] acisf11841/analysis//spectral/fullrun_ccd1_acisf11841_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete