[Tue Feb 21 04:44:12 2012] Detection parameters:
  Position = (705.5, 771.5) = 0 42 32.08 41 13 14.3
  Extent = 0.7" x 0.5", rotation angle = 40 degrees
  Source counts = 170.1 +/- 13.1
  Background counts = 0.9
  Rate = 0.04 +/- 0.003

[Tue Feb 21 04:44:14 2012] Off-axis axis estimate = 3.79'
[Tue Feb 21 05:34:06 2012] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:34:06 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Feb 21 05:34:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 25, frac = 1.467
[Tue Feb 21 05:34:06 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.77"
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src4.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src4.csv
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src4.csv
[Tue Feb 21 06:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src4.csv
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src4.csv
[Tue Feb 21 06:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:53:59 2012] Spatial fit model total counts = 6.404540, observed total counts = 8.000000
[Tue Feb 21 06:53:59 2012] Offset between fit and detection position for source 6 = 0.834294 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.834294 pixels
  Position = (706.4, 771.6) = 0 42 32.06 41 13 14.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 7.0 +/- 2.6
  Background counts = 0.0
  Rate = 0.05 +/- 0.02
[Tue Feb 21 06:53:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:53:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 06:53:59 2012] Source does appear to be extended
[Tue Feb 21 06:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:42:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:42:23 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Tue Feb 21 07:42:23 2012] Spatial fitting skipped for pass 1: source                                 has 7.0 net counts, is at off-axis angle 3.8'
[Tue Feb 21 08:53:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 08:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 08:53:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 08:53:59 2012] Source does appear to be extended
[Tue Feb 21 08:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 09:03:32 2012] Writing source region out to fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src6_src.reg
[Tue Feb 21 09:03:32 2012] Extracting stamp from image fullrun_ccd3_acisf11840_pi14-548_cl_sm2.00.img.gz, (679, 744) - (734, 799)
[Tue Feb 21 09:03:32 2012] Writing fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src6.gif
[Tue Feb 21 09:04:49 2012] Size of ../../acisf11840/products/events/fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src6_src.evt.gz[events] = 8 counts
[Tue Feb 21 09:04:49 2012] Mean chipx,y = (560.50, 779.75)
[Tue Feb 21 09:04:49 2012] Mean tdetx,y = (4352.25, 3621.50)
[Tue Feb 21 09:04:49 2012] chipx,y range = (550.00-566.00, 769.00-799.00)
[Tue Feb 21 09:04:49 2012] ../../acisf11840/products/events/fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src6_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Tue Feb 21 09:11:03 2012] No arf file found
[Tue Feb 21 09:11:43 2012] Updating aperture counts using extracted products
[Tue Feb 21 09:11:43 2012] Error reading totcts from fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src6_src.pi
[Tue Feb 21 09:11:44 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 09:11:53 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 09:11:54 2012] acisf11840/analysis//spectral/fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete