[Tue Feb 21 04:44:12 2012] Detection parameters:
  Position = (490.9, 1034.6) = 0 42 41.44 41 15 23.8
  Extent = 0.5" x 0.5", rotation angle = 136 degrees
  Source counts = 16.2 +/- 4.1
  Background counts = 0.8
  Rate = 0.004 +/- 0.001

[Tue Feb 21 04:44:14 2012] Off-axis axis estimate = 1.10'
[Tue Feb 21 05:34:06 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:34:06 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 21 05:34:06 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Tue Feb 21 05:34:06 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 0.38"
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src31.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src31_1.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11840_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:47 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Feb 21 06:13:47 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11840_pi14-548_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:53:59 2012] Source 21 is offset by -2.804903 and 0.636853 pixels which is larger than
2 X fitted extent = 0.386736 x 0.386736, not incorporating fit results
[Tue Feb 21 06:53:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:53:59 2012] Assessing source extent using major
[Tue Feb 21 06:53:59 2012] Source does appear to be extended
[Tue Feb 21 06:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:42:23 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:42:23 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 21 07:42:23 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Tue Feb 21 07:42:23 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 0.38"
[Tue Feb 21 08:16:02 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass1_src24.ximg exists
[Tue Feb 21 08:16:02 2012] Warning: total counts is not > 0
[Tue Feb 21 08:16:02 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass1_src24_1.ximg exists
[Tue Feb 21 08:16:02 2012] Warning: total counts is not > 0
[Tue Feb 21 08:16:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11840_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11840_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 08:16:03 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Tue Feb 21 08:16:03 2012] Warning: total counts is not > 0
[Tue Feb 21 08:16:03 2012] fullrun_ccd3_acisf11840_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Feb 21 08:16:03 2012] Warning: total counts is not > 0
[Tue Feb 21 08:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11840_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11840_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 08:53:59 2012] Source 21 is offset by -3.182261 and 2.711558 pixels which is larger than
2 X fitted extent = 1.134561 x 1.134561, not incorporating fit results
[Tue Feb 21 08:53:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 08:53:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 08:53:59 2012] Assessing source extent using major
[Tue Feb 21 08:53:59 2012] Source does appear to be extended
[Tue Feb 21 08:53:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 09:03:33 2012] Writing source region out to fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src21_src.reg
[Tue Feb 21 09:03:33 2012] Extracting stamp from image fullrun_ccd3_acisf11840_pi14-548_cl_sm2.00.img.gz, (468, 1012) - (513, 1057)
[Tue Feb 21 09:03:33 2012] Writing fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src21.gif
[Tue Feb 21 09:10:02 2012] ../../acisf11840/products/events/fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src21_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 21 09:11:04 2012] No arf file found
[Tue Feb 21 09:11:44 2012] Updating aperture counts using extracted products
[Tue Feb 21 09:11:44 2012] Error reading totcts from fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src21_src.pi
[Tue Feb 21 09:11:44 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 09:11:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 09:11:54 2012] acisf11840/analysis//spectral/fullrun_ccd3_acisf11840_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete