[Tue Feb 21 04:44:10 2012] Detection parameters:
  Position = (218.8, 755.6) = 0 42 31.26 41 19 38.6
  Extent = 0.7" x 0.6", rotation angle = 35 degrees
  Source counts = 28.6 +/- 5.4
  Background counts = 0.4
  Rate = 0.007 +/- 0.001

[Tue Feb 21 04:44:10 2012] Off-axis axis estimate = 3.80'
[Tue Feb 21 05:16:59 2012] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:16:59 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Feb 21 05:16:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932
[Tue Feb 21 05:16:59 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.77"
[Tue Feb 21 05:34:06 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass0_src12.ximg exists
[Tue Feb 21 05:34:06 2012] Warning: total counts is not > 0
[Tue Feb 21 05:34:06 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass0_src12_1.ximg exists
[Tue Feb 21 05:34:06 2012] Warning: total counts is not > 0
[Tue Feb 21 05:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11840_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11840_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:34:06 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue Feb 21 05:34:06 2012] Warning: total counts is not > 0
[Tue Feb 21 05:34:06 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Feb 21 05:34:06 2012] Warning: total counts is not > 0
[Tue Feb 21 05:34:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11840_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11840_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:53:54 2012] Source 11 is offset by 5.191251 and 3.934898 pixels which is larger than
2 X fitted extent = 0.785614 x 0.785614, not incorporating fit results
[Tue Feb 21 06:53:54 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:53:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:53:54 2012] Assessing source extent using major
[Tue Feb 21 06:53:54 2012] Source does appear to be extended
[Tue Feb 21 06:53:54 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Tue Feb 21 07:30:32 2012] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:30:32 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Feb 21 07:30:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932
[Tue Feb 21 07:30:32 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.77"
[Tue Feb 21 07:42:22 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass1_src9.ximg exists
[Tue Feb 21 07:42:22 2012] Warning: total counts is not > 0
[Tue Feb 21 07:42:22 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass1_src9_1.ximg exists
[Tue Feb 21 07:42:22 2012] Warning: total counts is not > 0
[Tue Feb 21 07:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11840_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11840_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:42:23 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Tue Feb 21 07:42:23 2012] Warning: total counts is not > 0
[Tue Feb 21 07:42:23 2012] fullrun_ccd2_acisf11840_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Feb 21 07:42:23 2012] Warning: total counts is not > 0
[Tue Feb 21 07:42:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11840_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11840_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 08:53:55 2012] Source 11 is offset by 6.129625 and 2.999776 pixels which is larger than
2 X fitted extent = 0.785614 x 0.785614, not incorporating fit results
[Tue Feb 21 08:53:55 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 08:53:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 08:53:55 2012] Assessing source extent using major
[Tue Feb 21 08:53:55 2012] Source does appear to be extended
[Tue Feb 21 08:53:55 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Tue Feb 21 09:00:24 2012] Writing source region out to fullrun_ccd2_acisf11840_pi14-548_pass1_cl_src11_src.reg
[Tue Feb 21 09:00:24 2012] Extracting stamp from image fullrun_ccd2_acisf11840_pi14-548_cl_sm2.00.img.gz, (187, 723) - (251, 788)
[Tue Feb 21 09:00:24 2012] Writing fullrun_ccd2_acisf11840_pi14-548_pass1_cl_src11.gif
[Tue Feb 21 09:02:12 2012] ../../acisf11840/products/events/fullrun_ccd2_acisf11840_pi14-548_pass1_cl_src11_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 21 09:03:32 2012] No arf file found
[Tue Feb 21 09:11:43 2012] Updating aperture counts using extracted products
[Tue Feb 21 09:11:43 2012] Error reading totcts from fullrun_ccd2_acisf11840_pi14-548_pass1_cl_src11_src.pi
[Tue Feb 21 09:11:43 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 09:11:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 09:11:53 2012] acisf11840/analysis//spectral/fullrun_ccd2_acisf11840_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete