[Tue Feb 21 04:44:07 2012] Detection parameters:
  Position = (788.8, 627.9) = 0 43 3.21 41 15 27.7
  Extent = 0.6" x 0.5", rotation angle = 160 degrees
  Source counts = 239.8 +/- 15.6
  Background counts = 2.2
  Rate = 0.06 +/- 0.004

[Tue Feb 21 04:44:08 2012] Off-axis axis estimate = 4.02'
[Tue Feb 21 04:58:02 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 04:58:02 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Tue Feb 21 04:58:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Tue Feb 21 04:58:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.84"
[Tue Feb 21 05:16:59 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass0_src3.ximg exists
[Tue Feb 21 05:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11840_pi14-548_cl_pass0_src3.csv
[Tue Feb 21 05:16:59 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Feb 21 05:16:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11840_pi14-548_cl_pass0_src3.csv
[Tue Feb 21 05:16:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11840_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11840_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:16:59 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 21 05:16:59 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 21 05:16:59 2012] Fit fullrun_ccd1_acisf11840_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 21 06:53:52 2012] Spatial fit model total counts = 11.038200, observed total counts = 12.000000
[Tue Feb 21 06:53:52 2012] Offset between fit and detection position for source 1 = 0.913454 pixels
[Tue Feb 21 06:53:52 2012] 11.069128 total counts/ 0.069328 bgd. counts: snr = 41.776497
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.913454 pixels
  Position = (789.3, 628.6) = 0 43 3.21 41 15 27.8
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 11.0 +/- 3.3
  Background counts = 0.1
  Rate = 0.07 +/- 0.02
[Tue Feb 21 06:53:52 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:53:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:53:52 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 06:53:52 2012] Source does appear to be extended
[Tue Feb 21 06:53:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:05:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 07:05:49 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Tue Feb 21 07:05:49 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.902
[Tue Feb 21 07:05:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 0.65"
[Tue Feb 21 07:30:31 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass1_src2.ximg exists
[Tue Feb 21 07:30:31 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11840_pi14-548_cl_pass1_src2.csv
[Tue Feb 21 07:30:31 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Feb 21 07:30:31 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11840_pi14-548_cl_pass1_src2.csv
[Tue Feb 21 07:30:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11840_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11840_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:30:31 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Feb 21 07:30:31 2012] fullrun_ccd1_acisf11840_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Feb 21 07:30:31 2012] Fit fullrun_ccd1_acisf11840_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Feb 21 08:53:54 2012] Spatial fit model total counts = 11.756300, observed total counts = 12.000000
[Tue Feb 21 08:53:54 2012] Offset between fit and detection position for source 1 = 0.115171 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.115171 pixels
  Position = (789.3, 628.5) = 0 43 3.21 41 15 27.8
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 11.8 +/- 3.4
  Background counts = 0.0
  Rate = 0.08 +/- 0.02
[Tue Feb 21 08:53:54 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 08:53:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 08:53:54 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 08:53:54 2012] Source does appear to be extended
[Tue Feb 21 08:53:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 08:55:52 2012] Writing source region out to fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 21 08:55:52 2012] Extracting stamp from image fullrun_ccd1_acisf11840_pi14-548_cl_sm2.00.img.gz, (759, 598) - (820, 659)
[Tue Feb 21 08:55:52 2012] Writing fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1.gif
[Tue Feb 21 08:56:38 2012] Size of ../../acisf11840/products/events/fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1_src.evt.gz[events] = 12 counts
[Tue Feb 21 08:56:38 2012] Mean chipx,y = (267.75, 697.08)
[Tue Feb 21 08:56:38 2012] Mean tdetx,y = (4434.92, 4374.75)
[Tue Feb 21 08:56:38 2012] chipx,y range = (251.00-279.00, 674.00-706.00)
[Tue Feb 21 08:56:38 2012] Size of ../../acisf11840/products/events/fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1 counts
[Tue Feb 21 08:56:39 2012] Not generating rmf since there are only 11 counts
[Tue Feb 21 08:56:39 2012] arf not found, will run specextract
[Tue Feb 21 08:57:09 2012] ../../acisf11840/products/spectra/fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 21 08:57:09 2012] ../../acisf11840/products/spectra/fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 21 08:57:09 2012] Removal of ../../acisf11840/products/spectra/fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 21 09:00:24 2012] Spectrum 1 has only 12 counts, deleting rmf
[Tue Feb 21 09:00:24 2012] 190.14
[Tue Feb 21 09:11:43 2012] Updating aperture counts using extracted products
[Tue Feb 21 09:11:43 2012] Error reading totcts from fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 21 09:11:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 09:11:43 2012] Using photon index=1.80, rate=0.0802, arf fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1.arf
[Tue Feb 21 09:11:43 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 09:11:43 2012] Updating source flux to 9.5e-13
[Tue Feb 21 09:11:51 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 21 09:11:52 2012] acisf11840/analysis//spectral/fullrun_ccd1_acisf11840_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete