[Tue Feb 21 04:44:06 2012] Detection parameters:
  Position = (589.3, 180.8) = 0 42 55.17 41 18 36.2
  Extent = 0.6" x 0.5", rotation angle = 133 degrees
  Source counts = 19.7 +/- 4.5
  Background counts = 0.3
  Rate = 0.005 +/- 0.001

[Tue Feb 21 04:44:06 2012] Off-axis axis estimate = 3.19'
[Tue Feb 21 04:45:50 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 04:45:50 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Feb 21 04:45:50 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.971
[Tue Feb 21 04:45:50 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.62"
[Tue Feb 21 04:58:02 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass0_src6.ximg exists
[Tue Feb 21 04:58:02 2012] Warning: total counts is not > 0
[Tue Feb 21 04:58:02 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Feb 21 04:58:02 2012] Warning: total counts is not > 0
[Tue Feb 21 04:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11840_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11840_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 04:58:02 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Feb 21 04:58:02 2012] Warning: total counts is not > 0
[Tue Feb 21 04:58:02 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Feb 21 04:58:02 2012] Warning: total counts is not > 0
[Tue Feb 21 04:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11840_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11840_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:53:50 2012] Source 7 is offset by -3.199565 and 1.278971 pixels which is larger than
2 X fitted extent = 0.628858 x 0.628858, not incorporating fit results
[Tue Feb 21 06:53:50 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:53:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:53:50 2012] Assessing source extent using major
[Tue Feb 21 06:53:50 2012] Source does appear to be extended
[Tue Feb 21 06:53:50 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Tue Feb 21 06:54:19 2012] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:54:19 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Feb 21 06:54:19 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.971
[Tue Feb 21 06:54:19 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.62"
[Tue Feb 21 07:05:49 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass1_src5.ximg exists
[Tue Feb 21 07:05:49 2012] Warning: total counts is not > 0
[Tue Feb 21 07:05:49 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Feb 21 07:05:49 2012] Warning: total counts is not > 0
[Tue Feb 21 07:05:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11840_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11840_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:05:49 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 21 07:05:49 2012] Warning: total counts is not > 0
[Tue Feb 21 07:05:49 2012] fullrun_ccd0_acisf11840_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 21 07:05:49 2012] Warning: total counts is not > 0
[Tue Feb 21 07:05:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11840_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11840_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 08:53:52 2012] Source 7 is offset by -2.249179 and -3.639708 pixels which is larger than
2 X fitted extent = 0.628858 x 0.628858, not incorporating fit results
[Tue Feb 21 08:53:52 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 08:53:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 08:53:52 2012] Assessing source extent using major
[Tue Feb 21 08:53:52 2012] Source does appear to be extended
[Tue Feb 21 08:53:52 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Tue Feb 21 08:54:18 2012] Writing source region out to fullrun_ccd0_acisf11840_pi14-548_pass1_cl_src7_src.reg
[Tue Feb 21 08:54:18 2012] Extracting stamp from image fullrun_ccd0_acisf11840_pi14-548_cl_sm2.00.img.gz, (561, 152) - (618, 209)
[Tue Feb 21 08:54:18 2012] Writing fullrun_ccd0_acisf11840_pi14-548_pass1_cl_src7.gif
[Tue Feb 21 08:55:27 2012] ../../acisf11840/products/events/fullrun_ccd0_acisf11840_pi14-548_pass1_cl_src7_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 21 08:55:52 2012] No arf file found
[Tue Feb 21 09:11:43 2012] Updating aperture counts using extracted products
[Tue Feb 21 09:11:43 2012] Error reading totcts from fullrun_ccd0_acisf11840_pi14-548_pass1_cl_src7_src.pi
[Tue Feb 21 09:11:43 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 09:11:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 09:11:51 2012] acisf11840/analysis//spectral/fullrun_ccd0_acisf11840_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete