[Wed May  1 06:07:44 2013] Detection parameters:
  Position = (594.3, 366.2) = 0 42 28.22 41 10 0.2
  Extent = 2.1" x 1.5", rotation angle = 25 degrees
  Source counts = 92.8 +/- 9.9
  Background counts = 5.2
  Rate = 0.02 +/- 0.002

[Wed May  1 06:07:47 2013] Off-axis axis estimate = 7.13'
[Wed May  1 06:08:50 2013] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 2.26"
[Wed May  1 06:08:50 2013] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.964
[Wed May  1 06:08:50 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 2.26"
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src9.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src9.csv
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src9_1.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src9.csv
[Wed May  1 06:08:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed May  1 06:08:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:10 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 26.356855 pixels away
[Wed May  1 06:09:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:10 2013] Assessing source extent using major
[Wed May  1 06:09:10 2013] Source does appear to be extended
[Wed May  1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.42
[Wed May  1 06:09:35 2013] Using EEF radius (= 2.26 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 2.26"
[Wed May  1 06:09:35 2013] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.964
[Wed May  1 06:09:35 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 2.26"
[Wed May  1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src5.ximg exists
[Wed May  1 06:09:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src5.csv
[Wed May  1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src5_1.ximg exists
[Wed May  1 06:09:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src5.csv
[Wed May  1 06:09:36 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed May  1 06:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed May  1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May  1 06:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed May  1 06:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:52 2013] Spatial fit model total counts = 4.701550, observed total counts = 5.000000
[Wed May  1 06:09:52 2013] Offset between fit and detection position for source 8 = 2.431555 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.431555 pixels
  Position = (593.7, 363.8) = 0 42 28.27 41 9 58.8
  Extent = 3.9 (2.5-4.5)", rotation angle = 137 (129-147) degrees
  Source counts = 4.7 +/- 2.2
  Background counts = 0.0
  Rate = 0.03 +/- 0.01
[Wed May  1 06:09:52 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:52 2013] Assessing source extent using major axis lower bound
[Wed May  1 06:09:52 2013] Source does appear to be extended
[Wed May  1 06:09:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.55
[Wed May  1 06:09:52 2013] Source is asymmetric
[Wed May  1 06:11:35 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8_src.reg
[Wed May  1 06:11:35 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (417, 187) - (770, 540)
[Wed May  1 06:11:35 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8.gif
[Wed May  1 06:12:41 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8_src.evt.gz[events] = 2 counts
[Wed May  1 06:12:41 2013] Mean chipx,y = (442.00, 326.00)
[Wed May  1 06:12:41 2013] Mean tdetx,y = (4806.00, 3503.00)
[Wed May  1 06:12:41 2013] chipx,y range = (433.00-451.00, 326.00-326.00)
[Wed May  1 06:12:41 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 7 counts
[Wed May  1 06:12:43 2013] Not generating rmf since there are only 4 counts
[Wed May  1 06:12:43 2013] arf not found, will run specextract
[Wed May  1 06:13:06 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8.warf not found
[Wed May  1 06:13:06 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8.wrmf not found
[Wed May  1 06:13:06 2013] Removal of ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8.soff failed
[Wed May  1 06:22:35 2013] Spectrum 8 has only 5 counts, deleting rmf
[Wed May  1 06:22:35 2013] 176.991
[Wed May  1 06:23:40 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:40 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8_src.pi.gz = 2.00
[Wed May  1 06:23:40 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8_bgd.pi.gz = 7.00
[Wed May  1 06:23:40 2013] Got source and background scale factors 0.000007, 0.000543
[Wed May  1 06:23:40 2013] User source parameters:
  Position = (593.7, 363.8) = 0 42 28.27 41 9 58.8
  Extent = 3.9 (2.5-4.5)", rotation angle = 137 (129-147) degrees
  Source aperture counts = 1.9 +/- 2.7
  Background aperture counts = 0.1
  Rate = 0.01 +/- 0.02

[Wed May  1 06:23:42 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 06:23:42 2013] Using photon index=1.80, rate=0.0321, arf fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8.arf
[Wed May  1 06:23:42 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 06:23:42 2013] Updating source flux to 4.1e-13
[Wed May  1 06:23:49 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete