[Wed May 1 06:07:45 2013] Detection parameters: Position = (234.2, 1156.6) = 0 42 43.91 41 16 29.1 Extent = 0.5" x 0.5", rotation angle = 172 degrees Source counts = 24.9 +/- 5.2 Background counts = 2.1 Rate = 0.006 +/- 0.001 [Wed May 1 06:07:47 2013] Off-axis axis estimate = 0.17' [Wed May 1 06:08:50 2013] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.41" [Wed May 1 06:08:50 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.249 [Wed May 1 06:08:50 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 0.41" [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src23.ximg exists [Wed May 1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src23.csv [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src23_1.ximg exists [Wed May 1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src23.csv [Wed May 1 06:08:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src23.ximg exists [Wed May 1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src23.csv [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists [Wed May 1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src23.csv [Wed May 1 06:08:52 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:10 2013] Source 34 is offset by -1.833902 and -1.427831 pixels which is larger than 2 X fitted extent = 0.459443 x 0.459443, not incorporating fit results [Wed May 1 06:09:10 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:10 2013] Assessing source extent using major [Wed May 1 06:09:10 2013] Source does appear to be extended [Wed May 1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.07 [Wed May 1 06:09:35 2013] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.41" [Wed May 1 06:09:35 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.249 [Wed May 1 06:09:35 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 0.41" [Wed May 1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src15.ximg exists [Wed May 1 06:09:36 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src15.csv [Wed May 1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src15_1.ximg exists [Wed May 1 06:09:36 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src15.csv [Wed May 1 06:09:36 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src15.ximg exists [Wed May 1 06:09:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src15.csv [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists [Wed May 1 06:09:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src15.csv [Wed May 1 06:09:40 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src15_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:52 2013] Source 34 is offset by -1.834520 and -1.424623 pixels which is larger than 2 X fitted extent = 0.452374 x 0.452374, not incorporating fit results [Wed May 1 06:09:52 2013] Source 34 is offset by -1.831419 and -1.425257 pixels which is larger than 2 X fitted extent = 0.467122 x 0.467122, not incorporating fit results [Wed May 1 06:09:52 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:52 2013] Assessing source extent using major [Wed May 1 06:09:52 2013] Source does appear to be extended [Wed May 1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.07 [Wed May 1 06:11:35 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34_src.reg [Wed May 1 06:11:35 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (210, 1133) - (258, 1165) [Wed May 1 06:11:35 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34.gif [Wed May 1 06:16:57 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34_src.evt.gz[events] = 1 counts [Wed May 1 06:16:57 2013] Mean chipx,y = (964.00, 1000.00) [Wed May 1 06:16:57 2013] Mean tdetx,y = (4132.00, 4025.00) [Wed May 1 06:16:57 2013] chipx,y range = (964.00-964.00, 1000.00-1000.00) [Wed May 1 06:16:57 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 1 counts [Wed May 1 06:16:58 2013] Not generating rmf since there are only 24 counts [Wed May 1 06:16:58 2013] arf not found, will run specextract [Wed May 1 06:17:28 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34.warf not found [Wed May 1 06:17:28 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34.wrmf not found [Wed May 1 06:17:28 2013] Removal of ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34.soff failed [Wed May 1 06:22:35 2013] Spectrum 34 has only 25 counts, deleting rmf [Wed May 1 06:22:35 2013] 127.545 [Wed May 1 06:23:41 2013] Updating aperture counts using extracted products [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34_src.pi.gz = 1.00 [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34_bgd.pi.gz = 1.00 [Wed May 1 06:23:41 2013] Got source and background scale factors 0.000001, 0.000009 [Wed May 1 06:23:41 2013] User source parameters: Position = (234.2, 1156.6) = 0 42 43.91 41 16 29.1 Extent = 0.5" x 0.5", rotation angle = 172 Source aperture counts = 0.9 +/- 2.3 Background aperture counts = 0.1 Rate = 0.006 +/- 0.02 [Wed May 1 06:23:41 2013] Updating counts from extracted products [Wed May 1 06:23:41 2013] Set source signif. to 0.91/0.29 = 3.12 [Wed May 1 06:23:42 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 06:23:42 2013] Using photon index=1.80, rate=0.0062, arf fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34.arf [Wed May 1 06:23:42 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 06:23:42 2013] Updating source flux to 1.1e-13 [Wed May 1 06:23:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete