[Wed May 1 06:07:45 2013] Detection parameters: Position = (216.5, 1133.8) = 0 42 44.69 41 16 17.9 Extent = 0.5" x 0.5", rotation angle = 171 degrees Source counts = 14.2 +/- 4.0 Background counts = 1.8 Rate = 0.004 +/- 0.001 [Wed May 1 06:07:47 2013] Off-axis axis estimate = 0.40' [Wed May 1 06:08:50 2013] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.40" [Wed May 1 06:08:50 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.875 [Wed May 1 06:08:50 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 0.40" [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src30.ximg exists [Wed May 1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src30.csv [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src30_1.ximg exists [Wed May 1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src30.csv [Wed May 1 06:08:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src30_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src30.ximg exists [Wed May 1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src30.csv [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists [Wed May 1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src30.csv [Wed May 1 06:08:52 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src30_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:10 2013] Source 32 is offset by -1.131837 and -0.893142 pixels which is larger than 2 X fitted extent = 1.076333 x 1.076333, not incorporating fit results [Wed May 1 06:09:10 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:10 2013] Assessing source extent using major [Wed May 1 06:09:10 2013] Source does appear to be extended [Wed May 1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.04 [Wed May 1 06:09:35 2013] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.40" [Wed May 1 06:09:35 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.875 [Wed May 1 06:09:35 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 0.40" [Wed May 1 06:09:37 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src22.ximg exists [Wed May 1 06:09:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src22.csv [Wed May 1 06:09:37 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src22_1.ximg exists [Wed May 1 06:09:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src22.csv [Wed May 1 06:09:37 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src22_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src22.ximg exists [Wed May 1 06:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src22.csv [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists [Wed May 1 06:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src22.csv [Wed May 1 06:09:40 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:52 2013] Source 32 is offset by -1.131837 and -0.893142 pixels which is larger than 2 X fitted extent = 1.076333 x 1.076333, not incorporating fit results [Wed May 1 06:09:52 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:52 2013] Assessing source extent using major [Wed May 1 06:09:52 2013] Source does appear to be extended [Wed May 1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.04 [Wed May 1 06:11:36 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32_src.reg [Wed May 1 06:11:36 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (193, 1110) - (240, 1157) [Wed May 1 06:11:36 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32.gif [Wed May 1 06:19:42 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32_src.evt.gz[events] = 3 counts [Wed May 1 06:19:42 2013] Mean chipx,y = (975.00, 985.67) [Wed May 1 06:19:42 2013] Mean tdetx,y = (4146.33, 4036.00) [Wed May 1 06:19:42 2013] chipx,y range = (963.00-992.00, 973.00-1004.00) [Wed May 1 06:19:42 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 1 counts [Wed May 1 06:19:43 2013] Not generating rmf since there are only 14 counts [Wed May 1 06:19:43 2013] arf not found, will run specextract [Wed May 1 06:20:18 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32.warf not found [Wed May 1 06:20:18 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32.wrmf not found [Wed May 1 06:20:18 2013] Removal of ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32.soff failed [Wed May 1 06:22:35 2013] Spectrum 32 has only 14 counts, deleting rmf [Wed May 1 06:22:35 2013] 206.139 [Wed May 1 06:23:41 2013] Updating aperture counts using extracted products [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32_src.pi.gz = 3.00 [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32_bgd.pi.gz = 1.00 [Wed May 1 06:23:41 2013] Got source and background scale factors 0.000001, 0.000007 [Wed May 1 06:23:41 2013] User source parameters: Position = (216.5, 1133.8) = 0 42 44.69 41 16 17.9 Extent = 0.5" x 0.5", rotation angle = 171 Source aperture counts = 2.9 +/- 2.9 Background aperture counts = 0.1 Rate = 0.02 +/- 0.02 [Wed May 1 06:23:41 2013] Updating counts from extracted products [Wed May 1 06:23:41 2013] Set source signif. to 2.89/0.33 = 8.80 [Wed May 1 06:23:42 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 06:23:42 2013] Using photon index=1.80, rate=0.0196, arf fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32.arf [Wed May 1 06:23:42 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 06:23:42 2013] Updating source flux to 2.1e-13 [Wed May 1 06:23:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete