[Wed May 1 06:07:45 2013] Detection parameters: Position = (203.9, 1119.2) = 0 42 45.23 41 16 10.7 Extent = 0.8" x 0.5", rotation angle = 175 degrees Source counts = 13.8 +/- 4.0 Background counts = 2.2 Rate = 0.003 +/- 0.001 [Wed May 1 06:07:47 2013] Off-axis axis estimate = 0.56' [Wed May 1 06:08:50 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.39" [Wed May 1 06:08:50 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.599 [Wed May 1 06:08:50 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 0.39" [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src31.ximg exists [Wed May 1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src31.csv [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src31_1.ximg exists [Wed May 1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src31.csv [Wed May 1 06:08:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src31.ximg exists [Wed May 1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src31.csv [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists [Wed May 1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src31.csv [Wed May 1 06:08:52 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src31_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:10 2013] Source 30 is offset by -0.119002 and -0.797980 pixels which is larger than 2 X fitted extent = 0.396191 x 0.396191, not incorporating fit results [Wed May 1 06:09:10 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:10 2013] Assessing source extent using major [Wed May 1 06:09:10 2013] Source does appear to be extended [Wed May 1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.70 [Wed May 1 06:09:10 2013] Source is asymmetric [Wed May 1 06:09:35 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.39" [Wed May 1 06:09:35 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.599 [Wed May 1 06:09:35 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 0.39" [Wed May 1 06:09:37 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src23.ximg exists [Wed May 1 06:09:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src23.csv [Wed May 1 06:09:37 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src23_1.ximg exists [Wed May 1 06:09:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src23.csv [Wed May 1 06:09:37 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src23.ximg exists [Wed May 1 06:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src23.csv [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists [Wed May 1 06:09:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src23.csv [Wed May 1 06:09:40 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:52 2013] Source 30 is offset by -0.119002 and -0.797980 pixels which is larger than 2 X fitted extent = 0.396191 x 0.396191, not incorporating fit results [Wed May 1 06:09:52 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:52 2013] Assessing source extent using major [Wed May 1 06:09:52 2013] Source does appear to be extended [Wed May 1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.70 [Wed May 1 06:09:52 2013] Source is asymmetric [Wed May 1 06:11:36 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30_src.reg [Wed May 1 06:11:36 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (166, 1081) - (242, 1157) [Wed May 1 06:11:36 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30.gif [Wed May 1 06:20:28 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30_src.evt.gz[events] = 2 counts [Wed May 1 06:20:28 2013] Mean chipx,y = (981.50, 982.00) [Wed May 1 06:20:28 2013] Mean tdetx,y = (4150.00, 4042.50) [Wed May 1 06:20:28 2013] chipx,y range = (976.00-987.00, 979.00-985.00) [Wed May 1 06:20:28 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 1 counts [Wed May 1 06:20:29 2013] Not generating rmf since there are only 13 counts [Wed May 1 06:20:29 2013] arf not found, will run specextract [Wed May 1 06:21:01 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30.warf not found [Wed May 1 06:21:01 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30.wrmf not found [Wed May 1 06:21:01 2013] Removal of ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30.soff failed [Wed May 1 06:22:35 2013] Spectrum 30 has only 14 counts, deleting rmf [Wed May 1 06:22:35 2013] 206.157 [Wed May 1 06:23:41 2013] Updating aperture counts using extracted products [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30_src.pi.gz = 2.00 [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30_bgd.pi.gz = 1.00 [Wed May 1 06:23:41 2013] Got source and background scale factors 0.000001, 0.000019 [Wed May 1 06:23:41 2013] User source parameters: Position = (203.9, 1119.2) = 0 42 45.23 41 16 10.7 Extent = 0.8" x 0.5", rotation angle = 175 Source aperture counts = 1.9 +/- 2.7 Background aperture counts = 0.1 Rate = 0.01 +/- 0.02 [Wed May 1 06:23:41 2013] Updating counts from extracted products [Wed May 1 06:23:41 2013] Set source signif. to 1.93/0.26 = 7.49 [Wed May 1 06:23:42 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 06:23:42 2013] Using photon index=1.80, rate=0.0131, arf fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30.arf [Wed May 1 06:23:42 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 06:23:42 2013] Updating source flux to 1.4e-13 [Wed May 1 06:23:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete