[Wed May  1 06:07:44 2013] Detection parameters:
  Position = (813.5, 856.7) = 0 42 18.65 41 14 1.4
  Extent = 0.8" x 0.5", rotation angle = 59 degrees
  Source counts = 194.6 +/- 14.0
  Background counts = 2.4
  Rate = 0.05 +/- 0.004

[Wed May  1 06:07:47 2013] Off-axis axis estimate = 5.25'
[Wed May  1 06:08:50 2013] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 1.28"
[Wed May  1 06:08:50 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.087
[Wed May  1 06:08:50 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 1.28"
[Wed May  1 06:08:50 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src4.ximg exists
[Wed May  1 06:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src4.csv
[Wed May  1 06:08:50 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src4_1.ximg exists
[Wed May  1 06:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src4.csv
[Wed May  1 06:08:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src4.csv
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src4.csv
[Wed May  1 06:08:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:10 2013] Spatial fit model total counts = 2.596700, observed total counts = 4.000000
[Wed May  1 06:09:10 2013] Offset between fit and detection position for source 3 = 0.877991 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.877991 pixels
  Position = (812.6, 856.6) = 0 42 18.71 41 14 1.1
  Extent = 1.5 (0.8-2.6)" x 0.4 (0.3-0.9)", rotation angle = 101 (79-126) degrees
  Source counts = 2.8 +/- 1.7
  Background counts = 0.0
  Rate = 0.02 +/- 0.01
[Wed May  1 06:09:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:10 2013] Assessing source extent using major axis lower bound
[Wed May  1 06:09:10 2013] Source does appear to be extended
[Wed May  1 06:09:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Wed May  1 06:09:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.97"
[Wed May  1 06:09:35 2013] Spatial fitting skipped for pass 1: source                                 has 2.8 net counts, is at off-axis angle 5.2'
[Wed May  1 06:09:52 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:52 2013] Assessing source extent using major axis lower bound
[Wed May  1 06:09:52 2013] Source does appear to be extended
[Wed May  1 06:09:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Wed May  1 06:11:35 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src3_src.reg
[Wed May  1 06:11:35 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (742, 786) - (883, 927)
[Wed May  1 06:11:35 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src3.gif
[Wed May  1 06:11:50 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src3_src.evt.gz[events] = 3 counts
[Wed May  1 06:11:50 2013] Mean chipx,y = (342.00, 864.67)
[Wed May  1 06:11:50 2013] Mean tdetx,y = (4267.33, 3403.00)
[Wed May  1 06:11:50 2013] chipx,y range = (334.00-351.00, 860.00-870.00)
[Wed May  1 06:11:50 2013] ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src3_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Wed May  1 06:22:35 2013] No arf file found
[Wed May  1 06:23:40 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:40 2013] Error reading totcts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src3_src.pi
[Wed May  1 06:23:42 2013] No arf file for this source, not re-computing flux
[Wed May  1 06:23:49 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete