[Wed May  1 06:07:45 2013] Detection parameters:
  Position = (182.4, 1062.2) = 0 42 46.17 41 15 42.7
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.003 +/- 0.0008

[Wed May  1 06:07:47 2013] Off-axis axis estimate = 1.03'
[Wed May  1 06:08:50 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed May  1 06:08:50 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Wed May  1 06:08:50 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 0.38"
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src35.ximg exists
[Wed May  1 06:08:51 2013] Warning: total counts is not > 0
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src35_1.ximg exists
[Wed May  1 06:08:51 2013] Warning: total counts is not > 0
[Wed May  1 06:08:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Wed May  1 06:08:52 2013] Warning: total counts is not > 0
[Wed May  1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May  1 06:08:52 2013] Warning: total counts is not > 0
[Wed May  1 06:08:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:10 2013] Source 22 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Wed May  1 06:09:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:10 2013] Assessing source extent using major
[Wed May  1 06:09:10 2013] Source does appear to be extended
[Wed May  1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 06:09:35 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed May  1 06:09:35 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Wed May  1 06:09:35 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 0.38"
[Wed May  1 06:09:38 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src27.ximg exists
[Wed May  1 06:09:39 2013] Warning: total counts is not > 0
[Wed May  1 06:09:39 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src27_1.ximg exists
[Wed May  1 06:09:39 2013] Warning: total counts is not > 0
[Wed May  1 06:09:39 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Wed May  1 06:09:40 2013] Warning: total counts is not > 0
[Wed May  1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Wed May  1 06:09:40 2013] Warning: total counts is not > 0
[Wed May  1 06:09:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:52 2013] Source 22 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Wed May  1 06:09:52 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:52 2013] Assessing source extent using major
[Wed May  1 06:09:52 2013] Source does appear to be extended
[Wed May  1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 06:11:36 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src22_src.reg
[Wed May  1 06:11:36 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (160, 1040) - (205, 1085)
[Wed May  1 06:11:36 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src22.gif
[Wed May  1 06:21:51 2013] ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src22_src.evt.gz[events] does not have any counts, not extracting products.
[Wed May  1 06:22:35 2013] No arf file found
[Wed May  1 06:23:42 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:42 2013] Error reading totcts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src22_src.pi
[Wed May  1 06:23:42 2013] No arf file for this source, not re-computing flux
[Wed May  1 06:23:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete