[Wed May 1 06:07:45 2013] Detection parameters: Position = (206.7, 1061.0) = 0 42 45.11 41 15 42.1 Extent = 0.5" x 0.5", rotation angle = 76 degrees Source counts = 16.2 +/- 4.1 Background counts = 0.8 Rate = 0.004 +/- 0.001 [Wed May 1 06:07:47 2013] Off-axis axis estimate = 0.94' [Wed May 1 06:08:50 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.38" [Wed May 1 06:08:50 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926 [Wed May 1 06:08:50 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 0.38" [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src28.ximg exists [Wed May 1 06:08:51 2013] Warning: total counts is not > 0 [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src28_1.ximg exists [Wed May 1 06:08:51 2013] Warning: total counts is not > 0 [Wed May 1 06:08:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src28.ximg exists [Wed May 1 06:08:52 2013] Warning: total counts is not > 0 [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists [Wed May 1 06:08:52 2013] Warning: total counts is not > 0 [Wed May 1 06:08:52 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:10 2013] Source 21 is offset by -0.754372 and -2.450709 pixels which is larger than 2 X fitted extent = 0.386358 x 0.386358, not incorporating fit results [Wed May 1 06:09:10 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:10 2013] Assessing source extent using major [Wed May 1 06:09:10 2013] Source does appear to be extended [Wed May 1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 06:09:35 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.38" [Wed May 1 06:09:35 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926 [Wed May 1 06:09:35 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 0.38" [Wed May 1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src20.ximg exists [Wed May 1 06:09:37 2013] Warning: total counts is not > 0 [Wed May 1 06:09:37 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src20_1.ximg exists [Wed May 1 06:09:37 2013] Warning: total counts is not > 0 [Wed May 1 06:09:37 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src20_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src20.ximg exists [Wed May 1 06:09:40 2013] Warning: total counts is not > 0 [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists [Wed May 1 06:09:40 2013] Warning: total counts is not > 0 [Wed May 1 06:09:40 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:52 2013] Source 21 is offset by -1.763041 and -0.478606 pixels which is larger than 2 X fitted extent = 0.386358 x 0.386358, not incorporating fit results [Wed May 1 06:09:52 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:52 2013] Assessing source extent using major [Wed May 1 06:09:52 2013] Source does appear to be extended [Wed May 1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 06:11:35 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src21_src.reg [Wed May 1 06:11:35 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (184, 1039) - (229, 1084) [Wed May 1 06:11:36 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src21.gif [Wed May 1 06:19:04 2013] ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src21_src.evt.gz[events] does not have any counts, not extracting products. [Wed May 1 06:22:35 2013] No arf file found [Wed May 1 06:23:41 2013] Updating aperture counts using extracted products [Wed May 1 06:23:41 2013] Error reading totcts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src21_src.pi [Wed May 1 06:23:42 2013] No arf file for this source, not re-computing flux [Wed May 1 06:23:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete