[Wed May  1 06:07:44 2013] Detection parameters:
  Position = (710.0, 869.1) = 0 42 23.16 41 14 7.6
  Extent = 0.9" x 0.5", rotation angle = 69 degrees
  Source counts = 65.3 +/- 8.1
  Background counts = 0.7
  Rate = 0.02 +/- 0.002

[Wed May  1 06:07:47 2013] Off-axis axis estimate = 4.47'
[Wed May  1 06:08:50 2013] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.98"
[Wed May  1 06:08:50 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Wed May  1 06:08:50 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 0.98"
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src13.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src13.csv
[Wed May  1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src13_1.ximg exists
[Wed May  1 06:08:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src13.csv
[Wed May  1 06:08:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed May  1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src13.csv
[Wed May  1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May  1 06:08:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src13.csv
[Wed May  1 06:08:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:10 2013] Spatial fit model total counts = 2.560350, observed total counts = 3.000000
[Wed May  1 06:09:10 2013] Offset between fit and detection position for source 16 = 0.894822 pixels
[Wed May  1 06:09:10 2013] 2.584450 total counts/ 0.000000 bgd. counts: snr = 581773547383320.000000
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.894822 pixels
  Position = (710.7, 868.5) = 0 42 23.15 41 14 7.0
  Extent = 0.8 (0.4-1.2)", rotation angle = 0
  Source counts = 2.6 +/- 1.6
  Background counts = 0.0
  Rate = 0.02 +/- 0.01
[Wed May  1 06:09:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:10 2013] Assessing source extent using major axis lower bound
[Wed May  1 06:09:10 2013] Source does appear to be extended
[Wed May  1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 06:09:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.78"
[Wed May  1 06:09:35 2013] Spatial fitting skipped for pass 1: source                                 has 2.6 net counts, is at off-axis angle 4.5'
[Wed May  1 06:09:52 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:52 2013] Assessing source extent using major axis lower bound
[Wed May  1 06:09:52 2013] Source does appear to be extended
[Wed May  1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 06:11:35 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src16_src.reg
[Wed May  1 06:11:35 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (675, 833) - (747, 904)
[Wed May  1 06:11:35 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src16.gif
[Wed May  1 06:15:04 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src16_src.evt.gz[events] = 3 counts
[Wed May  1 06:15:04 2013] Mean chipx,y = (441.00, 836.00)
[Wed May  1 06:15:04 2013] Mean tdetx,y = (4296.00, 3502.00)
[Wed May  1 06:15:04 2013] chipx,y range = (422.00-453.00, 823.00-858.00)
[Wed May  1 06:15:04 2013] ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src16_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Wed May  1 06:22:35 2013] No arf file found
[Wed May  1 06:23:40 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:40 2013] Error reading totcts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src16_src.pi
[Wed May  1 06:23:42 2013] No arf file for this source, not re-computing flux
[Wed May  1 06:23:49 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete