[Wed May 1 06:07:44 2013] Detection parameters: Position = (490.7, 752.8) = 0 42 32.73 41 13 10.4 Extent = 0.6" x 0.5", rotation angle = 98 degrees Source counts = 17.8 +/- 4.2 Background counts = 0.2 Rate = 0.004 +/- 0.001 [Wed May 1 06:07:47 2013] Off-axis axis estimate = 3.91' [Wed May 1 06:08:50 2013] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:08:50 2013] Initial guess for spatial extent in simple fitting = 0.80" [Wed May 1 06:08:50 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880 [Wed May 1 06:08:50 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 0.80" [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src26.ximg exists [Wed May 1 06:08:51 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src26.csv [Wed May 1 06:08:51 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src26_1.ximg exists [Wed May 1 06:08:51 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src26.csv [Wed May 1 06:08:51 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src26_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src26.ximg exists [Wed May 1 06:08:52 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src26.csv [Wed May 1 06:08:52 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists [Wed May 1 06:08:52 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src26.csv [Wed May 1 06:08:52 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src26_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:10 2013] Source 10 is offset by -0.331815 and -1.166175 pixels which is larger than 2 X fitted extent = 0.816024 x 0.816024, not incorporating fit results [Wed May 1 06:09:10 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:10 2013] Assessing source extent using major [Wed May 1 06:09:10 2013] Source does appear to be extended [Wed May 1 06:09:10 2013] Computing asymmetry using major and minor axis, asym = 1.21 [Wed May 1 06:09:35 2013] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:09:35 2013] Initial guess for spatial extent in simple fitting = 0.80" [Wed May 1 06:09:35 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880 [Wed May 1 06:09:35 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 0.80" [Wed May 1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src18.ximg exists [Wed May 1 06:09:36 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src18.csv [Wed May 1 06:09:36 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src18_1.ximg exists [Wed May 1 06:09:36 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src18.csv [Wed May 1 06:09:36 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src18_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src18.ximg exists [Wed May 1 06:09:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src18.csv [Wed May 1 06:09:40 2013] fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists [Wed May 1 06:09:40 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src18.csv [Wed May 1 06:09:40 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf11839_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:52 2013] Source 10 is offset by -2.921511 and 5.499200 pixels which is larger than 2 X fitted extent = 0.816024 x 0.816024, not incorporating fit results [Wed May 1 06:09:52 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:52 2013] Assessing source extent using major [Wed May 1 06:09:52 2013] Source does appear to be extended [Wed May 1 06:09:52 2013] Computing asymmetry using major and minor axis, asym = 1.21 [Wed May 1 06:11:35 2013] Writing source region out to fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10_src.reg [Wed May 1 06:11:35 2013] Extracting stamp from image fullrun_ccd3_acisf11839_pi14-548_cl_sm2.00.img.gz, (463, 726) - (518, 780) [Wed May 1 06:11:35 2013] Writing fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10.gif [Wed May 1 06:18:19 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10_src.evt.gz[events] = 1 counts [Wed May 1 06:18:19 2013] Mean chipx,y = (635.00, 678.00) [Wed May 1 06:18:19 2013] Mean tdetx,y = (4454.00, 3696.00) [Wed May 1 06:18:19 2013] chipx,y range = (635.00-635.00, 678.00-678.00) [Wed May 1 06:18:19 2013] Size of ../../acisf11839/products/events/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 1 counts [Wed May 1 06:18:20 2013] Not generating rmf since there are only 17 counts [Wed May 1 06:18:20 2013] arf not found, will run specextract [Wed May 1 06:18:52 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10.warf not found [Wed May 1 06:18:52 2013] ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10.wrmf not found [Wed May 1 06:18:52 2013] Removal of ../../acisf11839/products/spectra/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10.soff failed [Wed May 1 06:22:35 2013] Spectrum 10 has only 18 counts, deleting rmf [Wed May 1 06:22:35 2013] 193.325 [Wed May 1 06:23:41 2013] Updating aperture counts using extracted products [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10_src.pi.gz = 1.00 [Wed May 1 06:23:41 2013] Total counts from fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10_bgd.pi.gz = 1.00 [Wed May 1 06:23:41 2013] Got source and background scale factors 0.000001, 0.000012 [Wed May 1 06:23:41 2013] User source parameters: Position = (490.7, 752.8) = 0 42 32.73 41 13 10.4 Extent = 0.6" x 0.5", rotation angle = 98 Source aperture counts = 0.9 +/- 2.3 Background aperture counts = 0.1 Rate = 0.006 +/- 0.02 [Wed May 1 06:23:41 2013] Updating counts from extracted products [Wed May 1 06:23:41 2013] Set source signif. to 0.92/0.28 = 3.33 [Wed May 1 06:23:42 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 06:23:42 2013] Using photon index=1.80, rate=0.00626, arf fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10.arf [Wed May 1 06:23:42 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 06:23:42 2013] Updating source flux to 7.3e-14 [Wed May 1 06:23:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 06:23:50 2013] acisf11839/analysis//spectral/fullrun_ccd3_acisf11839_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete