[Wed May 1 06:07:43 2013] Detection parameters: Position = (441.0, 459.4) = 0 42 26.06 41 19 14.7 Extent = 0.6" x 0.5", rotation angle = 105 degrees Source counts = 129.9 +/- 11.4 Background counts = 1.1 Rate = 0.03 +/- 0.003 [Wed May 1 06:07:44 2013] Off-axis axis estimate = 4.18' [Wed May 1 06:08:48 2013] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:08:48 2013] Initial guess for spatial extent in simple fitting = 0.88" [Wed May 1 06:08:48 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948 [Wed May 1 06:08:48 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.88" [Wed May 1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src3.ximg exists [Wed May 1 06:08:49 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src3.csv [Wed May 1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src3_1.ximg exists [Wed May 1 06:08:49 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src3.csv [Wed May 1 06:08:49 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Wed May 1 06:08:49 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src3.csv [Wed May 1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Wed May 1 06:08:49 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src3.csv [Wed May 1 06:08:49 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:06 2013] Source 4 is offset by -0.035728 and 1.370156 pixels which is larger than 2 X fitted extent = 0.898439 x 0.898439, not incorporating fit results [Wed May 1 06:09:06 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:06 2013] Assessing source extent using major [Wed May 1 06:09:06 2013] Source does appear to be extended [Wed May 1 06:09:06 2013] Computing asymmetry using major and minor axis, asym = 1.21 [Wed May 1 06:09:34 2013] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:09:34 2013] Initial guess for spatial extent in simple fitting = 0.88" [Wed May 1 06:09:34 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948 [Wed May 1 06:09:34 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.88" [Wed May 1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src2.ximg exists [Wed May 1 06:09:34 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src2.csv [Wed May 1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src2_1.ximg exists [Wed May 1 06:09:34 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src2.csv [Wed May 1 06:09:34 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src2.ximg exists [Wed May 1 06:09:34 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src2.csv [Wed May 1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists [Wed May 1 06:09:34 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src2.csv [Wed May 1 06:09:34 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:09:49 2013] Source 4 is offset by -4.040809 and -0.630243 pixels which is larger than 2 X fitted extent = 0.898439 x 0.898439, not incorporating fit results [Wed May 1 06:09:49 2013] Vigneting correction estimate = 1.000000 [Wed May 1 06:09:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 06:09:49 2013] Assessing source extent using major [Wed May 1 06:09:49 2013] Source does appear to be extended [Wed May 1 06:09:49 2013] Computing asymmetry using major and minor axis, asym = 1.21 [Wed May 1 06:11:01 2013] Not overwriting source region fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.reg [Wed May 1 06:11:01 2013] Extracting stamp from image fullrun_ccd2_acisf11839_pi14-548_cl_sm2.00.img.gz, (414, 432) - (468, 487) [Wed May 1 06:11:01 2013] Writing fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4.gif [Wed May 1 06:11:03 2013] ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.evt and ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create [Wed May 1 06:11:03 2013] Size of ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.evt.gz[events] = 2 counts [Wed May 1 06:11:03 2013] Mean chipx,y = (377.50, 645.50) [Wed May 1 06:11:03 2013] Mean tdetx,y = (3706.50, 3708.50) [Wed May 1 06:11:03 2013] chipx,y range = (367.00-388.00, 643.00-648.00) [Wed May 1 06:11:03 2013] Size of ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 1 counts [Wed May 1 06:11:03 2013] ../../acisf11839/products/images/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.img and ../../acisf11839/products/images/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create [Wed May 1 06:11:03 2013] ../../acisf11839/products/spectra/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.pi and ../../acisf11839/products/spectra/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create [Wed May 1 06:11:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 06:11:06 2013] ../../acisf11839/products/lightcurves/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.lc and ../../acisf11839/products/lightcurves/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create [Wed May 1 06:11:34 2013] Keeping rmf generated by specextract [Wed May 1 06:11:35 2013] 188.955 [Wed May 1 06:23:39 2013] Updating aperture counts using extracted products [Wed May 1 06:23:39 2013] Total counts from fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_src.pi.gz = 2.00 [Wed May 1 06:23:39 2013] Total counts from fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_bgd.pi.gz = 1.00 [Wed May 1 06:23:39 2013] Got source and background scale factors 0.000001, 0.000013 [Wed May 1 06:23:39 2013] User source parameters: Position = (441.0, 459.4) = 0 42 26.06 41 19 14.7 Extent = 0.6" x 0.5", rotation angle = 105 Source aperture counts = 1.9 +/- 2.7 Background aperture counts = 0.1 Rate = 0.01 +/- 0.02 [Wed May 1 06:23:39 2013] Updating counts from extracted products [Wed May 1 06:23:39 2013] Set source signif. to 1.93/0.26 = 7.30 [Wed May 1 06:23:39 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 06:23:39 2013] Using photon index=1.80, rate=0.0131, arf fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4.arf [Wed May 1 06:23:39 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 1 06:23:40 2013] Updating source flux to 1.5e-13 [Wed May 1 06:23:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 06:23:49 2013] acisf11839/analysis//spectral/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete