[Wed May  1 06:07:43 2013] Detection parameters:
  Position = (683.1, 614.4) = 0 42 15.48 41 20 30.9
  Extent = 1.4" x 1.1", rotation angle = 77 degrees
  Source counts = 11.2 +/- 3.5
  Background counts = 0.8
  Rate = 0.003 +/- 0.0009

[Wed May  1 06:07:44 2013] Off-axis axis estimate = 6.52'
[Wed May  1 06:08:48 2013] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:48 2013] Initial guess for spatial extent in simple fitting = 1.90"
[Wed May  1 06:08:48 2013] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.943
[Wed May  1 06:08:48 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 1.90"
[Wed May  1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src15.ximg exists
[Wed May  1 06:08:49 2013] Warning: total counts is not > 0
[Wed May  1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src15_1.ximg exists
[Wed May  1 06:08:49 2013] Warning: total counts is not > 0
[Wed May  1 06:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:50 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed May  1 06:08:50 2013] Warning: total counts is not > 0
[Wed May  1 06:08:50 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May  1 06:08:50 2013] Warning: total counts is not > 0
[Wed May  1 06:08:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:06 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 21.005600 pixels away
[Wed May  1 06:09:06 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:06 2013] Assessing source extent using major
[Wed May  1 06:09:06 2013] Source does appear to be extended
[Wed May  1 06:09:06 2013] Computing asymmetry using major and minor axis, asym = 1.31
[Wed May  1 06:09:34 2013] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:34 2013] Initial guess for spatial extent in simple fitting = 1.90"
[Wed May  1 06:09:34 2013] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.943
[Wed May  1 06:09:34 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 1.90"
[Wed May  1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src13.ximg exists
[Wed May  1 06:09:34 2013] Warning: total counts is not > 0
[Wed May  1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src13_1.ximg exists
[Wed May  1 06:09:34 2013] Warning: total counts is not > 0
[Wed May  1 06:09:34 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:35 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed May  1 06:09:35 2013] Warning: total counts is not > 0
[Wed May  1 06:09:35 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May  1 06:09:35 2013] Warning: total counts is not > 0
[Wed May  1 06:09:35 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:49 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 22.245779 pixels away
[Wed May  1 06:09:49 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:49 2013] Assessing source extent using major
[Wed May  1 06:09:49 2013] Source does appear to be extended
[Wed May  1 06:09:49 2013] Computing asymmetry using major and minor axis, asym = 1.31
[Wed May  1 06:11:01 2013] Not overwriting source region fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_src.reg
[Wed May  1 06:11:01 2013] Extracting stamp from image fullrun_ccd2_acisf11839_pi14-548_cl_sm2.00.img.gz, (618, 550) - (748, 679)
[Wed May  1 06:11:01 2013] Writing fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20.gif
[Wed May  1 06:11:18 2013] ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_src.evt and ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed May  1 06:11:18 2013] ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_src.evt.gz[events] does not have any counts, not extracting products.
[Wed May  1 06:11:18 2013] ../../acisf11839/products/images/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_src.img and ../../acisf11839/products/images/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed May  1 06:11:18 2013] ../../acisf11839/products/lightcurves/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_src.lc and ../../acisf11839/products/lightcurves/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed May  1 06:11:35 2013] No arf file found
[Wed May  1 06:23:39 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:39 2013] Error reading totcts from fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_src.pi
[Wed May  1 06:23:40 2013] No arf file for this source, not re-computing flux
[Wed May  1 06:23:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 06:23:49 2013] acisf11839/analysis//spectral/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete