[Wed May  1 06:07:43 2013] Detection parameters:
  Position = (669.6, 483.4) = 0 42 16.07 41 19 26.4
  Extent = 1.2" x 0.5", rotation angle = 77 degrees
  Source counts = 19.6 +/- 4.5
  Background counts = 0.4
  Rate = 0.005 +/- 0.001

[Wed May  1 06:07:44 2013] Off-axis axis estimate = 5.83'
[Wed May  1 06:08:48 2013] Using EEF radius (= 1.55 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:48 2013] Initial guess for spatial extent in simple fitting = 1.55"
[Wed May  1 06:08:48 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921
[Wed May  1 06:08:48 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 1.55"
[Wed May  1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src13.ximg exists
[Wed May  1 06:08:49 2013] Warning: total counts is not > 0
[Wed May  1 06:08:49 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src13_1.ximg exists
[Wed May  1 06:08:49 2013] Warning: total counts is not > 0
[Wed May  1 06:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:50 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed May  1 06:08:50 2013] Warning: total counts is not > 0
[Wed May  1 06:08:50 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May  1 06:08:50 2013] Warning: total counts is not > 0
[Wed May  1 06:08:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:06 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.996899 pixels away
[Wed May  1 06:09:06 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:06 2013] Assessing source extent using major
[Wed May  1 06:09:06 2013] Source does appear to be extended
[Wed May  1 06:09:06 2013] Computing asymmetry using major and minor axis, asym = 2.12
[Wed May  1 06:09:06 2013] Source is asymmetric
[Wed May  1 06:09:34 2013] Using EEF radius (= 1.55 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:34 2013] Initial guess for spatial extent in simple fitting = 1.55"
[Wed May  1 06:09:34 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921
[Wed May  1 06:09:34 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 1.55"
[Wed May  1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src11.ximg exists
[Wed May  1 06:09:34 2013] Warning: total counts is not > 0
[Wed May  1 06:09:34 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src11_1.ximg exists
[Wed May  1 06:09:34 2013] Warning: total counts is not > 0
[Wed May  1 06:09:34 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:35 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed May  1 06:09:35 2013] Warning: total counts is not > 0
[Wed May  1 06:09:35 2013] fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May  1 06:09:35 2013] Warning: total counts is not > 0
[Wed May  1 06:09:35 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11839_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:49 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.776279 pixels away
[Wed May  1 06:09:49 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:49 2013] Assessing source extent using major
[Wed May  1 06:09:49 2013] Source does appear to be extended
[Wed May  1 06:09:49 2013] Computing asymmetry using major and minor axis, asym = 2.12
[Wed May  1 06:09:49 2013] Source is asymmetric
[Wed May  1 06:11:01 2013] Not overwriting source region fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_src.reg
[Wed May  1 06:11:01 2013] Extracting stamp from image fullrun_ccd2_acisf11839_pi14-548_cl_sm2.00.img.gz, (616, 430) - (723, 536)
[Wed May  1 06:11:01 2013] Writing fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17.gif
[Wed May  1 06:11:18 2013] ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_src.evt and ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed May  1 06:11:18 2013] ../../acisf11839/products/events/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_src.evt.gz[events] does not have any counts, not extracting products.
[Wed May  1 06:11:18 2013] ../../acisf11839/products/images/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_src.img and ../../acisf11839/products/images/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed May  1 06:11:18 2013] ../../acisf11839/products/lightcurves/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_src.lc and ../../acisf11839/products/lightcurves/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed May  1 06:11:35 2013] No arf file found
[Wed May  1 06:23:39 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:39 2013] Error reading totcts from fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_src.pi
[Wed May  1 06:23:40 2013] No arf file for this source, not re-computing flux
[Wed May  1 06:23:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 06:23:49 2013] acisf11839/analysis//spectral/fullrun_ccd2_acisf11839_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete