[Wed May  1 06:07:40 2013] Detection parameters:
  Position = (506.8, 394.0) = 0 43 7.52 41 20 19.9
  Extent = 0.8" x 0.5", rotation angle = 141 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.003 +/- 0.0008

[Wed May  1 06:07:40 2013] Off-axis axis estimate = 5.94'
[Wed May  1 06:08:45 2013] Using EEF radius (= 1.60 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:08:45 2013] Initial guess for spatial extent in simple fitting = 1.60"
[Wed May  1 06:08:45 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.138
[Wed May  1 06:08:45 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 1.60"
[Wed May  1 06:08:47 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass0_src5.ximg exists
[Wed May  1 06:08:47 2013] Warning: total counts is not > 0
[Wed May  1 06:08:47 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass0_src5_1.ximg exists
[Wed May  1 06:08:47 2013] Warning: total counts is not > 0
[Wed May  1 06:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11839_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11839_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:47 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed May  1 06:08:47 2013] Warning: total counts is not > 0
[Wed May  1 06:08:47 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May  1 06:08:47 2013] Warning: total counts is not > 0
[Wed May  1 06:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11839_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11839_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:08:58 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 18.749194 pixels away
[Wed May  1 06:08:58 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:08:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:08:58 2013] Assessing source extent using major
[Wed May  1 06:08:58 2013] Source does appear to be extended
[Wed May  1 06:08:58 2013] Computing asymmetry using major and minor axis, asym = 1.71
[Wed May  1 06:08:58 2013] Source is asymmetric
[Wed May  1 06:09:32 2013] Using EEF radius (= 1.60 ")to estimate initial spatial extent for simple fitting
[Wed May  1 06:09:32 2013] Initial guess for spatial extent in simple fitting = 1.60"
[Wed May  1 06:09:32 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.138
[Wed May  1 06:09:32 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 1.60"
[Wed May  1 06:09:33 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass1_src5.ximg exists
[Wed May  1 06:09:33 2013] Warning: total counts is not > 0
[Wed May  1 06:09:33 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass1_src5_1.ximg exists
[Wed May  1 06:09:33 2013] Warning: total counts is not > 0
[Wed May  1 06:09:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11839_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11839_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:33 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed May  1 06:09:33 2013] Warning: total counts is not > 0
[Wed May  1 06:09:33 2013] fullrun_ccd0_acisf11839_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May  1 06:09:33 2013] Warning: total counts is not > 0
[Wed May  1 06:09:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11839_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11839_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 06:09:46 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.806095 pixels away
[Wed May  1 06:09:46 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:09:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:09:46 2013] Assessing source extent using major
[Wed May  1 06:09:46 2013] Source does appear to be extended
[Wed May  1 06:09:46 2013] Computing asymmetry using major and minor axis, asym = 1.71
[Wed May  1 06:09:46 2013] Source is asymmetric
[Wed May  1 06:10:20 2013] Not overwriting source region fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_src.reg
[Wed May  1 06:10:20 2013] Extracting stamp from image fullrun_ccd0_acisf11839_pi14-548_cl_sm2.00.img.gz, (468, 355) - (545, 433)
[Wed May  1 06:10:20 2013] Writing fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5.gif
[Wed May  1 06:10:24 2013] ../../acisf11839/products/events/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_src.evt and ../../acisf11839/products/events/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed May  1 06:10:24 2013] ../../acisf11839/products/events/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_src.evt.gz[events] does not have any counts, not extracting products.
[Wed May  1 06:10:24 2013] ../../acisf11839/products/images/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_src.img and ../../acisf11839/products/images/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed May  1 06:10:24 2013] ../../acisf11839/products/lightcurves/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_src.lc and ../../acisf11839/products/lightcurves/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed May  1 06:10:31 2013] No arf file found
[Wed May  1 06:23:37 2013] Updating aperture counts using extracted products
[Wed May  1 06:23:37 2013] Error reading totcts from fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_src.pi
[Wed May  1 06:23:38 2013] No arf file for this source, not re-computing flux
[Wed May  1 06:23:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 06:23:47 2013] acisf11839/analysis//spectral/fullrun_ccd0_acisf11839_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete