[Tue Feb 21 04:52:59 2012] Detection parameters:
  Position = (815.8, 265.2) = 0 42 11.68 41 10 49.5
  Extent = 2.1" x 1.4", rotation angle = 26 degrees
  Source counts = 30.3 +/- 5.7
  Background counts = 1.7
  Rate = 0.008 +/- 0.001

[Tue Feb 21 04:52:59 2012] Off-axis axis estimate = 8.38'
[Tue Feb 21 05:33:54 2012] Using EEF radius (= 3.11 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:33:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 05:33:54 2012] Initial guess for spatial extent in simple fitting = 3.11"
[Tue Feb 21 05:33:54 2012] source mask rpix=6.3, npix_max = 185, mask sum = 196, frac = 1.056
[Tue Feb 21 05:33:54 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 3.11"
[Tue Feb 21 06:13:00 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src25.ximg exists
[Tue Feb 21 06:13:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src25.csv
[Tue Feb 21 06:13:00 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src25_1.ximg exists
[Tue Feb 21 06:13:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src25.csv
[Tue Feb 21 06:13:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:01 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Tue Feb 21 06:13:01 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src25.csv
[Tue Feb 21 06:13:01 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Feb 21 06:13:01 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src25.csv
[Tue Feb 21 06:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:14 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 35.727227 pixels away
[Tue Feb 21 06:13:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:13:14 2012] Assessing source extent using major
[Tue Feb 21 06:13:14 2012] Source does appear to be extended
[Tue Feb 21 06:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.48
[Tue Feb 21 06:41:49 2012] Using EEF radius (= 3.11 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:41:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 06:41:49 2012] Initial guess for spatial extent in simple fitting = 3.11"
[Tue Feb 21 06:41:49 2012] source mask rpix=6.3, npix_max = 185, mask sum = 196, frac = 1.056
[Tue Feb 21 06:41:49 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 3.11"
[Tue Feb 21 07:12:58 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src20.ximg exists
[Tue Feb 21 07:12:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src20.csv
[Tue Feb 21 07:12:58 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src20_1.ximg exists
[Tue Feb 21 07:12:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src20.csv
[Tue Feb 21 07:12:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:12:59 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Tue Feb 21 07:12:59 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Feb 21 07:12:59 2012] Fit fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Feb 21 07:13:11 2012] Source 39 is offset by -3.254431 and -2.751543 pixels which is larger than
2 X fitted extent = 3.156476 x 3.156476, not incorporating fit results
[Tue Feb 21 07:13:11 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:13:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:13:11 2012] Assessing source extent using major
[Tue Feb 21 07:13:11 2012] Source does appear to be extended
[Tue Feb 21 07:13:11 2012] Computing asymmetry using major and minor axis, asym = 1.48
[Tue Feb 21 07:19:12 2012] Writing source region out to fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39_src.reg
[Tue Feb 21 07:19:12 2012] Extracting stamp from image fullrun_ccd3_acisf11838_pi14-548_cl_sm2.00.img.gz, (720, 169) - (912, 361)
[Tue Feb 21 07:19:12 2012] Writing fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39.gif
[Tue Feb 21 07:24:29 2012] Size of ../../acisf11838/products/events/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39_src.evt.gz[events] = 1 counts
[Tue Feb 21 07:24:29 2012] Mean chipx,y = (312.00, 247.00)
[Tue Feb 21 07:24:29 2012] Mean tdetx,y = (4885.00, 3373.00)
[Tue Feb 21 07:24:29 2012] chipx,y range = (312.00-312.00, 247.00-247.00)
[Tue Feb 21 07:24:29 2012] Size of ../../acisf11838/products/events/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 2 counts
[Tue Feb 21 07:24:30 2012] Not generating rmf since there are only 30 counts
[Tue Feb 21 07:24:30 2012] arf not found, will run specextract
[Tue Feb 21 07:24:55 2012] ../../acisf11838/products/spectra/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39.warf not found
[Tue Feb 21 07:24:55 2012] ../../acisf11838/products/spectra/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39.wrmf not found
[Tue Feb 21 07:24:55 2012] Removal of ../../acisf11838/products/spectra/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39.soff failed
[Tue Feb 21 07:27:17 2012] Spectrum 39 has only 30 counts, deleting rmf
[Tue Feb 21 07:27:17 2012] 169.211
[Tue Feb 21 07:27:25 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:27:25 2012] Error reading totcts from fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39_src.pi.gz
[Tue Feb 21 07:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:27:26 2012] Using photon index=1.80, rate=0.00764, arf fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39.arf
[Tue Feb 21 07:27:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 07:27:26 2012] Updating source flux to 1e-13
[Tue Feb 21 07:27:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 07:27:37 2012] acisf11838/analysis//spectral/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete