[Tue Feb 21 04:52:59 2012] Detection parameters:
  Position = (76.3, 917.3) = 0 42 43.90 41 16 10.6
  Extent = 0.5" x 0.5", rotation angle = 31 degrees
  Source counts = 23.9 +/- 5.1
  Background counts = 2.1
  Rate = 0.006 +/- 0.001

[Tue Feb 21 04:52:59 2012] Off-axis axis estimate = 0.44'
[Tue Feb 21 05:33:54 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:33:54 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Feb 21 05:33:54 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.323
[Tue Feb 21 05:33:54 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.40"
[Tue Feb 21 06:13:00 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src27.ximg exists
[Tue Feb 21 06:13:00 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:00 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src27_1.ximg exists
[Tue Feb 21 06:13:00 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:01 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Tue Feb 21 06:13:01 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:01 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Feb 21 06:13:01 2012] Warning: total counts is not > 0
[Tue Feb 21 06:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:14 2012] Source 32 is offset by 1.765557 and -2.153670 pixels which is larger than
2 X fitted extent = 0.402114 x 0.402114, not incorporating fit results
[Tue Feb 21 06:13:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:13:14 2012] Assessing source extent using major
[Tue Feb 21 06:13:14 2012] Source does appear to be extended
[Tue Feb 21 06:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:41:49 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:41:49 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Feb 21 06:41:49 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.323
[Tue Feb 21 06:41:49 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 0.40"
[Tue Feb 21 07:12:58 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src21.ximg exists
[Tue Feb 21 07:12:58 2012] Warning: total counts is not > 0
[Tue Feb 21 07:12:58 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src21_1.ximg exists
[Tue Feb 21 07:12:58 2012] Warning: total counts is not > 0
[Tue Feb 21 07:12:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:12:59 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Tue Feb 21 07:12:59 2012] Warning: total counts is not > 0
[Tue Feb 21 07:12:59 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Feb 21 07:12:59 2012] Warning: total counts is not > 0
[Tue Feb 21 07:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:13:11 2012] Source 32 is offset by -2.222644 and -0.126138 pixels which is larger than
2 X fitted extent = 0.402114 x 0.402114, not incorporating fit results
[Tue Feb 21 07:13:11 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:13:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:13:11 2012] Assessing source extent using major
[Tue Feb 21 07:13:11 2012] Source does appear to be extended
[Tue Feb 21 07:13:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:19:12 2012] Writing source region out to fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src32_src.reg
[Tue Feb 21 07:19:12 2012] Extracting stamp from image fullrun_ccd3_acisf11838_pi14-548_cl_sm2.00.img.gz, (54, 895) - (99, 940)
[Tue Feb 21 07:19:12 2012] Writing fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src32.gif
[Tue Feb 21 07:25:07 2012] ../../acisf11838/products/events/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src32_src.evt.gz[events] does not have any counts, not extracting products.
[Tue Feb 21 07:27:17 2012] No arf file found
[Tue Feb 21 07:27:25 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:27:25 2012] Error reading totcts from fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src32_src.pi
[Tue Feb 21 07:27:26 2012] No arf file for this source, not re-computing flux
[Tue Feb 21 07:27:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 07:27:37 2012] acisf11838/analysis//spectral/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete