[Tue Feb 21 04:52:58 2012] Detection parameters:
  Position = (118.4, 838.9) = 0 42 42.07 41 15 32.0
  Extent = 0.5" x 0.5", rotation angle = 96 degrees
  Source counts = 19.4 +/- 4.5
  Background counts = 0.6
  Rate = 0.005 +/- 0.001

[Tue Feb 21 04:52:59 2012] Off-axis axis estimate = 1.14'
[Tue Feb 21 05:33:54 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:33:54 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 21 05:33:54 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Tue Feb 21 05:33:54 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 0.38"
[Tue Feb 21 06:13:00 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src31.ximg exists
[Tue Feb 21 06:13:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src31.csv
[Tue Feb 21 06:13:00 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src31_1.ximg exists
[Tue Feb 21 06:13:00 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src31.csv
[Tue Feb 21 06:13:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:01 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Tue Feb 21 06:13:01 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src31.csv
[Tue Feb 21 06:13:01 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Feb 21 06:13:01 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src31.csv
[Tue Feb 21 06:13:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 06:13:14 2012] Source 21 is offset by -1.576405 and -0.106512 pixels which is larger than
2 X fitted extent = 0.493841 x 0.493841, not incorporating fit results
[Tue Feb 21 06:13:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 06:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 06:13:14 2012] Assessing source extent using major
[Tue Feb 21 06:13:14 2012] Source does appear to be extended
[Tue Feb 21 06:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:41:49 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 06:41:49 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Feb 21 06:41:49 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Tue Feb 21 06:41:49 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 0.38"
[Tue Feb 21 07:12:58 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src24.ximg exists
[Tue Feb 21 07:12:58 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src24.csv
[Tue Feb 21 07:12:58 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src24_1.ximg exists
[Tue Feb 21 07:12:58 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src24.csv
[Tue Feb 21 07:12:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:12:59 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Tue Feb 21 07:12:59 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src24.csv
[Tue Feb 21 07:12:59 2012] fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Feb 21 07:12:59 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src24.csv
[Tue Feb 21 07:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11838_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:13:11 2012] Source 21 is offset by 3.497077 and -4.247077 pixels which is larger than
2 X fitted extent = 0.387146 x 0.387146, not incorporating fit results
[Tue Feb 21 07:13:11 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:13:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:13:11 2012] Assessing source extent using major
[Tue Feb 21 07:13:11 2012] Source does appear to be extended
[Tue Feb 21 07:13:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:19:13 2012] Writing source region out to fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21_src.reg
[Tue Feb 21 07:19:13 2012] Extracting stamp from image fullrun_ccd3_acisf11838_pi14-548_cl_sm2.00.img.gz, (96, 816) - (141, 861)
[Tue Feb 21 07:19:13 2012] Writing fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21.gif
[Tue Feb 21 07:25:18 2012] Size of ../../acisf11838/products/events/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21_src.evt.gz[events] = 1 counts
[Tue Feb 21 07:25:18 2012] Mean chipx,y = (916.00, 871.00)
[Tue Feb 21 07:25:18 2012] Mean tdetx,y = (4261.00, 3977.00)
[Tue Feb 21 07:25:18 2012] chipx,y range = (916.00-916.00, 871.00-871.00)
[Tue Feb 21 07:25:18 2012] Size of ../../acisf11838/products/events/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 1 counts
[Tue Feb 21 07:25:19 2012] Not generating rmf since there are only 19 counts
[Tue Feb 21 07:25:19 2012] arf not found, will run specextract
[Tue Feb 21 07:25:47 2012] ../../acisf11838/products/spectra/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21.warf not found
[Tue Feb 21 07:25:47 2012] ../../acisf11838/products/spectra/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21.wrmf not found
[Tue Feb 21 07:25:47 2012] Removal of ../../acisf11838/products/spectra/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21.soff failed
[Tue Feb 21 07:27:17 2012] Spectrum 21 has only 19 counts, deleting rmf
[Tue Feb 21 07:27:17 2012] 205.107
[Tue Feb 21 07:27:26 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:27:26 2012] Error reading totcts from fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21_src.pi.gz
[Tue Feb 21 07:27:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:27:26 2012] Using photon index=1.80, rate=0.00488, arf fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21.arf
[Tue Feb 21 07:27:26 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 21 07:27:26 2012] Updating source flux to 5.4e-14
[Tue Feb 21 07:27:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 07:27:37 2012] acisf11838/analysis//spectral/fullrun_ccd3_acisf11838_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete